211 - 220 of 387
immersion gold finish pcb
Selling leads
|
This PCB utilizes TP960 as its base material, features an Electroless Nickel Immersion Gold (ENIG) surface finish, and strictly adheres to IPC-Class-2 ...
2026-05-27 18:53:21
|
|
This PCB utilizes TP600 as its base material, adopts an Electroless Nickel Electroless Palladium Immersion Gold (ENEPIG) surface finish, and strictly ...
2026-05-27 18:53:21
|
|
...PCB with Blue Solder Mask Coating Immersion Silver on Pads (Printed Circuit Boards are custom-made products, the picture and parameters shown are ...
2026-05-27 18:51:34
|
|
... PCB with 10mil, 25mil and 50mil Thick Coating Immersion Gold, Immersion Tin and Silver, OSP (PCB's are custom-made products, the picture and ...
2026-05-27 18:50:30
|
|
... Frequency PCB With 10mil, 20mil, 30mil and 60mil Thick Coating Immersion Gold and Immersion Silver (PCB's are custom-made products, the ...
2026-05-27 18:54:41
|
|
...°C for the application of micro SATA carrier board. It's 2.4 mm thick with white silkscreen(Taiyo) on green solder mask (Taiyo) and immersion ...
2026-05-27 18:54:24
|
|
.... The 1oz copper on both sides ensure superior conductivity and signal transmission quality. No solder mask or silkscreen characters are applied. ...
2026-05-27 18:53:09
|
|
...PCB Single-End Impedance Circuit Board 10 Layer PCB Board Satellite systems 1.1 General description This is a type of multilayer PCB built on FR-4 ...
2026-05-27 18:53:45
|
|
...PCB is a two-layer rigid PCB fabricated using Rogers RT/duroid 6002, a ceramic-filled polytetrafluoroethylene (PTFE) microwave laminate distinguish...
2026-06-09 09:55:00
|
|
...PCB features an Immersion Tin surface finish. Each layer is equipped with a 1oz copper weight, along with a finished board thickness of 1.8mm and a ...
2026-05-29 15:00:49
|