21 - 30 of 509
immersion gold ceramic pcb
Selling leads
|
...) Rogers TMM4 thermoset microwave material is ceramic, hydrocarbon, thermoset polymer composite designed for high plated-through-hole reliability ...
2026-04-13 05:31:19
|
|
Double Sided PCB Built On 30mil Rogers TC350 With Immersion Gold for Tower Mounted Amplifiers Rogers' TC350 is a woven fiberglass reinforced, ceramic ...
2026-04-13 05:31:19
|
|
...PCB Made on RO3035 10mil 0.254mm DK3.5 with Immersion Gold for Patch Antenna for Wireless Communications (Printed Circuit Boards are custom-made ...
2026-04-13 05:31:19
|
|
This is a 2-layer rigid printed circuit board (PCB) fabricated using TSM-DS3—a ceramic-filled reinforced material containing approximately 5% ...
2026-04-13 05:31:19
|
|
...PCB is a double-sided rigid board fabricated using TRF-45, a new generation of low-loss, thermally stable laminated material. Characterized by ...
2026-04-21 13:33:16
|
|
Immersion Gold PCB ENIG Circuit Board Soft Gold PCB Chemical Gold Circuits for Intercom System 1.1 General description This is a type of matt blue PCB ...
2026-04-13 05:31:19
|
|
...PCB 4-Layer Thin PCB 0.4mm Multilayer FR-4 PCB With Immersion Gold for GPS Module 1.1 General description This is a type of 4 layer printed circuit ...
2026-04-13 05:31:19
|
|
...PCB Built on Kappa 438 30mil 0.762mm DK 4.38 with Immersion Gold for Small Cells. (Printed Circuit Boards are custom-made products, the picture and ...
2026-04-13 05:31:19
|
|
... of Signal transmission with 12 layer copper track. It's 2.0 mm thick with white silkscreen(Taiyo) on green solder mask (Taiyo) and immersion gold ...
2026-04-13 05:31:19
|
|
...PCB 0.5mm 4-Layer Thin PCB Board With Immersion Gold (Printed circuits boards are custom-made products, the picture and parameters shown are just ...
2026-04-13 05:31:19
|