11 - 20 of 709
hasl finish pcb board
Selling leads
|
...Brief Introduction This type of immersion gold RF PCB is made on AD1000 material, PTFE/Woven Fiberglass/Ceramic Filled Laminate. The circuit board ...
2026-04-13 05:31:19
|
|
... for reference) 1.1 General description This is a type of impedance controlled PCB built on FR-4 material with Tg 175°C for the application of ...
2026-04-13 05:31:19
|
|
... thick without silkscreen on yellow solder mask (Taiyo) and immersion gold on pads. The base material is from Taiwan ITEQ supplying 72 up PCB per ...
2026-04-13 05:31:19
|
|
...PCB with Blue Solder Mask Coating Immersion Silver on Pads (Printed Circuit Boards are custom-made products, the picture and parameters shown are ...
2026-04-13 05:31:19
|
|
... for reference) Brief Introduction This is a type of low DK/DF FR-4 PCB which is built on TU-872 SLK Sp material. It is made on 4 layers copper ...
2026-04-13 05:31:19
|
|
...PCB 4 Layer Thiner Circuit Board Built On 0.4mm FR-4 With Immersion Gold for Data Acquisition 1.1 General description This is a type of 4 layer PCB ...
2026-04-13 05:31:19
|
|
...PCB Board Bulit On Rogers 20mil RO4003C with Immersion Gold (PCB's are custom-made products, the picture and parameters shown are just for ...
2026-04-13 05:31:19
|
|
...PCB with you.It is composed of RT/duroid 6006 ceramic PTFE composites with a dielectric constant of 6.15, ensuring minimal signal loss and maximum ...
2026-04-13 05:31:19
|
|
Introducing our newly shipped PCB which built on TLY-5 high frequency laminates. The TLY-5 High-Performance substrate is an advanced circuit material ...
2026-04-13 05:31:19
|
|
Single Layer Printed Circuit Board with White Solder Mask 0.2mm FR-4 PCB Board with OSP for Display Backlight (Printed circuits boards are custom-made ...
2026-04-13 05:31:19
|