71 - 80 of 709
hasl finish pcb board
Selling leads
|
This is a 6-layer high-performance PCB constructed with Rogers RO4350B laminate, a woven glass-reinforced hydrocarbon/ceramic composite engineered for ...
2026-04-13 05:31:19
|
|
Taconic High Frequency PCB Built on RF-35TC 30mil 0.762mm With Black Solder Mask for Antennas (Printed Circuit Boards are custom-made products, the ...
2026-04-13 05:31:19
|
|
Taconic RF PCB Made on TLF-35 60mil 1.524mm With Immersion Gold for Mixer, Filters and Couplers etc. (Printed Circuit Boards are custom-made products, ...
2026-04-13 05:31:19
|
|
Rogers PCB Made on RO3035 20mil 0.508mm DK3.5 With Immersion Gold for Direct Broadcast Satellites (Printed Circuit Boards are custom-made products, ...
2026-04-13 05:31:19
|
|
Rogers Microwave PCB Made on RO3010 25mil 0.635mm DK10.2 With Gold for Patch Antenna for Wireless Communications (Printed Circuit Boards are custom...
2026-04-13 05:31:19
|
|
Rogers 15mil TMM10 High Frequency PCB With Immersion Gold and Green Solder Mask for Chip Testers (Printed Circuit Boards are custom-made products, the ...
2026-04-13 05:31:19
|
|
Rogers PCB Built on Kappa 438 20mil 0.508mm DK 4.38 with Immersion Gold for Carrier Grade WiFi (Printed Circuit Boards are custom-made products, the ...
2026-04-13 05:31:19
|
|
Double Layer Rogers PCB Built on 60.7mil RO4003C LoPro Reverse Treated Foil for Power Amplifiers (Printed Circuit Boards are custom-made products, the ...
2026-04-13 05:31:19
|
|
Rogers Microwave PCB Made On RO3010 10mil 0.254mm DK10.2 With Immersion Gold for Direct Broadcast Satellites (Printed Circuit Boards are custom-made ...
2026-04-13 05:31:19
|
|
Rogers PCB Built on RT/Duroid 6002 10mil 0.254mm DK2.94 With Immersion Gold for Phased Array Antennas (Printed Circuit Boards are custom-made products...
2026-04-13 05:31:19
|