41 - 50 of 498
fr4 material hybrid pcb
Selling leads
|
... 135°C for the application of GPS Tracking. It's only 0.6 mm thick without silkscreen on green solder mask (Taiyo) and immersion gold on pads. The ...
2026-04-13 05:31:19
|
|
...PCB Built on TU-768 With 1.2mm Thick Coating Immersion Gold Multilayer TU-768 PCB (Printed Circuit Boards are custom-made products, the picture and ...
2026-04-13 05:31:19
|
|
...PCB is engineered for high-reliability, high-speed, and high-power applications, making it ideal for automotive, networking, telecommunications, ...
2026-04-13 05:31:19
|
|
...PCB on 0.4mm FR-4 ITEQ 4 Layer Circuit Board for Security Systems 1.1 General description This is a type of 4 layer printed circuit board built on ...
2026-04-13 05:31:19
|
|
...PCB 4 Layer Thiner Circuit Board Built On 0.4mm FR-4 With Immersion Gold for Data Acquisition 1.1 General description This is a type of 4 layer PCB ...
2026-04-13 05:31:19
|
|
... for reference) Brief Introduction This is a type of low DK/DF FR-4 PCB which is built on TU-872 SLK Sp material. It is made on 4 layers copper ...
2026-04-13 05:31:19
|
|
4 Layer Hybrid PCB Built On 8mil 0.203mm RO4003C and FR-4 for Phased Array Antennas (PCB’s are custom-made products, the picture and parameters shown ...
2026-04-13 05:31:19
|
|
... description This is a type of 2 Layer flexible printed circuit (FPC) built on polyimide for the application of Embedded Systems Programming. Basic ...
2026-04-13 05:31:19
|
|
Multilayer Printed Circuit Board (PCB) Flex-rigid PCB 3-layer FPC on Polyimide and FR4 with Immersion Gold Portable WiFi Router (Flexible printed ...
2026-04-13 05:31:19
|
|
Prototype PCB Sample Fabrication with 50 Ohm Impedance Built On FR-4 With Matt Black Mask and Immersion Gold 1.1 General description This is a type of ...
2026-04-13 05:31:19
|