261 - 270 of 317
double sided immersion gold pcb
Selling leads
|
... of Industrial controls with 24 layer copper track. It's 3.7 mm thick with white silkscreen(Taiyo) on green solder mask (Taiyo) and immersion gold ...
2026-04-13 05:31:19
|
|
... built on FR-4 substrate with Tg 135°C for the application of GPS Tracking. It's only 0.6 mm thick without silkscreen on green solder mask (Taiyo) ...
2026-04-13 05:31:19
|
|
...PCB with 8mil, 12mil, 20mil, 32mil and 60mil Coating with Immersion Gold, Silver, tin and OSP (PCB's are custom-made products, the picture and ...
2026-04-13 05:31:19
|
|
... on top side and bottom side, plated through holes connect each layer. Viewing from the stack-up, each dielectric material is more than 0.2mmm ...
2026-04-13 05:31:19
|
|
Countersunk Aluminum PCB Countersink MCPCB Made On 1oz Copper With Immersion Gold 1.1 General description This is a type of Aluminum PCB for the ...
2026-04-13 05:31:19
|
|
Taconic PCB Built on RF-35TC 20mil 0.508mm with Black Solder Mask and Immersion Gold for Power Amplifiers (Printed Circuit Boards are custom-made ...
2026-04-13 05:31:19
|
|
...Gold PCB Dual Layer 0.8mm FR-4 Circuit Board for Security Equipment 1.1 General description This is a type of double sided PCB built on FR-4 ...
2026-04-13 05:31:19
|
|
Taconic High Frequency PCB Built on RF-35TC 60mil 1.524mm With Immersion Gold for Satellites (Printed Circuit Boards are custom-made products, the ...
2026-04-13 05:31:19
|
|
Taconic RF PCB Made on TLF-35 60mil 1.524mm With Immersion Gold for Mixer, Filters and Couplers etc. (Printed Circuit Boards are custom-made products, ...
2026-04-13 05:31:19
|
|
Taconic High Frequency PCB Built On TLY-3 30mil 0.762mm With Immersion Gold for Satellite / Cellular Communications (Printed Circuit Boards are custom...
2026-04-13 05:31:19
|