211 - 220 of 272
double sided immersion gold pcb
Selling leads
|
Dual Layer High Frequency PCB Built On 1.5mm PTFE (Teflon) with 3oz Copper and Immersion Gold (PCB's are custom-made products, the picture and ...
2026-07-08 14:41:00
|
|
.... The 1oz copper on both sides ensure superior conductivity and signal transmission quality. No solder mask or silkscreen characters are applied. ...
2026-05-27 18:53:09
|
|
...PCB 50mil 1.27mm Double Sided Microwave Circuit Board With Immersion Silver (Printed Circuit Boards are custom-made products, the picture and ...
2026-05-27 18:54:26
|
|
...PCB Single-End Impedance Circuit Board 10 Layer PCB Board Satellite systems 1.1 General description This is a type of multilayer PCB built on FR-4 ...
2026-05-27 18:53:45
|
|
...substrate with Tg 135°C for the application of GPS Tracker For Kids. It's only 0.5 mm thick without silkscreen on yellow solder mask (Taiyo) ...
2026-05-27 18:53:51
|
|
...PCB utilizing Taconic CER-10 organic-ceramic laminate, engineered for high-performance microwave and RF circuit applications. The board features ...
2026-06-24 15:01:28
|
|
...PCB is a low-loss, high-stability microwave circuit board designed for RF, microwave, radar and satellite communication systems. Built with ...
2026-07-28 18:29:08
|
|
... with 1oz outer layer and half ounce inner layer. White silkscreen over matt blue solder mask on both top and bottom side. Surface finish is ...
2026-05-29 14:59:27
|
|
...PCB Differential Impedance Circuit Board 8 Layer PCB for Wireless HDMI 1.1 General description This is a type of 8 layer printed circuit board ...
2026-05-27 18:53:43
|
|
...PCB 24 Layer Printed Circuit Board Built On High Temperature FR-4 With 50 Ohm / 100 Ohm Impedance for Industrial controls General description This ...
2026-05-29 14:59:30
|