91 - 100 of 288
blind via immersion gold pcb
Selling leads
|
...PCB fabricated with a high-performance composite material system, WL-CT330 and High Tg FR-4 (S1000-2M). It integrates WL-CT330's ultra-low loss ...
2026-04-21 13:33:17
|
|
Brief Introduction This 2-layer rigid PCB features a stackup with copper_layer_1 of 35 μm, a Rogers RO4725JXR Core of 30.7mil (0.780 mm), and copper...
2026-04-13 05:31:19
|
|
Single Sided Flexible Printed Circuit (FPC) Built On Polyimide With Immersion Gold (FPC’s are custom-made products, the picture and parameters shown ...
2026-04-13 05:31:19
|
|
... on Polyimide with Immersion Gold and Impedance control for USB Connector (Flexible printed circuits are custom-made products, the picture and ...
2026-04-13 05:31:19
|
|
Rogers RF PCB Built on Kappa 438 30mil 0.762mm DK 4.38 with Immersion Gold for Small Cells. (Printed Circuit Boards are custom-made products, the ...
2026-04-13 05:31:19
|
|
...reference) General Description This is a type of antenna high frequency PCB which is built on Rogers RO4534 with 20mil substrate, starting 0.5oz ...
2026-04-13 05:31:19
|
|
Single Layer Flexible Printed Circuit on Polyimide with 2oz Copper Yellow Coverlay and Immersion Gold for Capacitive Screen (Flexible printed circuits ...
2026-04-13 05:31:19
|
|
Multilayer Flexible Printed Circuit 4-layer FPC on Polyimide With FR4 Stiffener and Immersion Gold for Digital Electronics (Flexible printed circuits ...
2026-04-13 05:31:19
|
|
Multilayer Flexible Circuit 4-layer FPC Built on Polyimide With Black Solder Mask and Immersion Gold for Touch Screen (Flexible printed circuits are ...
2026-04-13 05:31:19
|
|
2-Layer Flexible Printed Circuit (FPC) Built on Polyimide With Immersion Gold and Stiffener for Sports Insole (Flexible printed circuits are custom...
2026-04-13 05:31:19
|