281 - 288 of 288
blind via immersion gold pcb
Selling leads
|
2 Layer Flexible Printed Circuit FPC Built On Polyimide With PI Stiffener and Immersion Gold for Capacitive Touch Screen (Flexible printed circuits ...
2026-04-13 05:31:19
|
|
Brief Introduction This is a four-layer board made of polyimide material with a finished thickness of 1.3mm and 1oz finished copper on each layer (See ...
2026-04-13 05:31:19
|
|
...just for reference) This is a 4-layer RO4350B high frequency PCB built on 2 10mil cores, bonded by 1 sheet of RO4450Fprepreg. As per the requiremen...
2026-04-13 05:31:19
|
|
...PCB Built on 6.15 DK RF-60TC 10mil, 20mil, 30mil and 60mil Coating with Immersion Gold, Tin, HASL and OSP for Miniaturized Antenna (Printed Circuit ...
2026-04-13 05:31:19
|
|
... of 60mil (1.524mm) and immersion gold plating, the TLF-35 PCB is designed to provide excellent peel strength for 1/2 ounce and 1 ounce copper, ...
2026-04-13 05:31:19
|
|
... layer flexible circuit built on PET substrate, 1oz copper weight on each layer. The FPC is coating with white solder mask and immersion gold on ...
2026-04-13 05:31:19
|
|
...s FPC is a single sided strips with 2-meter long, 1oz copper with tesa tape on back side, white coverlay and immersion gold on the pads. It is ...
2026-04-13 05:31:19
|
|
PTFE High Frequency PCB Built on 2oz Copper 1.6mm Thick With Immersion Gold for Duplex Polytetrafluoroethylene (Short for PTFE), commonly known as ...
2026-04-13 05:31:19
|