41 - 50 of 201
59mil immersion silver circuit board
Selling leads
|
As technology continues to evolve rapidly, the demand for high-performance printed circuit boards (PCBs) has never been greater. Our newly shipped ...
2026-05-27 18:51:06
|
|
In the world of electronics, the choice of printed circuit board (PCB) material can significantly impact performance, especially in high-frequency and ...
2026-05-27 18:51:07
|
|
...Tg170 substrate for the application of codec equipment. It's 2.0 mm thick with white silkscreen on green solder mask and immersion gold on pads...
2026-05-27 18:54:05
|
|
...) 1.1 General description This is a type of 2 oz double sided PCB built on FR-4 substrate with Tg 150°C for the application of micro SATA carrier ...
2026-05-29 14:59:31
|
|
...Circuit Board Built on High Tg FR-4 for PLC Control Panel 1.1 General description This is a type of 10 layer printed circuit board built on FR-4 ...
2026-05-29 14:59:28
|
|
2-layer PCB on RF-10 Substrate 20mil Immersion Silver Finish This 2-layer high-performance PCB is engineered for RF (Radio Frequency) applications, ...
2026-05-27 18:53:18
|
|
This PCB is a two-layer rigid PCB fabricated using Rogers RT/duroid 6002, a ceramic-filled polytetrafluoroethylene (PTFE) microwave laminate ...
2026-06-09 09:55:00
|
|
... of ORCER (Organic Ceramic) RF-35 high frequency PCB. It’s built on 30mil core with 2oz copper on both top and bottom layer(double sided board). It...
2026-05-27 18:54:43
|
|
...substrate with Tg 135°C for the application of GPS Tracker For Kids. It's only 0.5 mm thick without silkscreen on yellow solder mask (Taiyo) ...
2026-05-27 18:53:51
|
|
...Circuit Boards Built On 1.6mm FR-4 With Blue Solder Mask (Printed circuits boards are custom-made products, the picture and parameters shown are ...
2026-05-29 14:59:31
|