211 - 220 of 225
3mm thick osp pcb
Selling leads
|
Introduction to TLX-8 Material TLX-8 is a high-volume antenna material composed of PTFE fiberglass laminates, specifically designed for reliable ...
2026-05-27 18:53:12
|
|
Wangling's F4BME217 is a high-performance PTFE composite laminate engineered for demanding RF and microwave applications. Precision-formulated ...
2026-05-29 14:59:51
|
|
...PCB Built on 6.15 DK RF-60TC 10mil, 20mil, 30mil and 60mil Coating with Immersion Gold, Tin, HASL and OSP for Miniaturized Antenna (Printed Circuit ...
2026-05-27 18:54:41
|
|
...FR-4 Tg170 substrate for the application of GPS Tracking Devices. It's 1.6 mm thick with white silkscreen on green solder mask and immersion ...
2026-05-29 14:59:29
|
|
... shown are just for reference) General description This is a type of flexible PCB built on polyimide 76 micron substrate with 90 ohm impedance ...
2026-05-29 15:00:03
|
|
...PCB 0.6mm HASL PCB FR-4 Double-Sided Circuit Board for Switch Sensor 1. General description This is a type of 2 layer printed circuit board built ...
2026-05-27 18:54:24
|
|
...PCB Countersunk Hole IMS Circuit Board for Led Lighting (PCB’s are custom-made products, the picture and parameters shown are just for reference) ...
2026-05-29 14:59:39
|
|
...aluminum PCB for the application of automotive ignitor. It's a single layer MCPCB board at 1.6 mm thick with 3 W/MK thermal conductivity. The ...
2026-05-29 14:59:40
|
|
...thickness of 60mil (1.524mm) and immersion gold plating, the TLF-35 PCB is designed to provide excellent peel strength for 1/2 ounce and 1 ounce ...
2026-05-27 18:54:07
|
|
PTFE High Frequency PCB Built on 2oz Copper 1.6mm Thick With Immersion Gold for Duplex Polytetrafluoroethylene (Short for PTFE), commonly known as ...
2026-05-27 18:53:33
|