121 - 130 of 375
30mil immersion silver pcb
Selling leads
|
...General description This is a type of multilayer PCB built on FR-4 substrate with Tg 150°C for the application of mobile phone with blind via ...
2026-04-13 05:31:19
|
|
...Tg170 substrate for the application of codec equipment. It's 2.0 mm thick with white silkscreen on green solder mask and immersion gold on pads...
2026-04-13 05:31:19
|
|
...PCB 4 Layer Thiner Circuit Board Built On 0.4mm FR-4 With Immersion Gold for Data Acquisition 1.1 General description This is a type of 4 layer PCB ...
2026-04-13 05:31:19
|
|
... for reference) Brief Introduction This is a type of low DK/DF FR-4 PCB which is built on TU-872 SLK Sp material. It is made on 4 layers copper ...
2026-04-13 05:31:19
|
|
50mil AD1000 Immersion Gold RF PCB 1.27mm 2 Layer Circuit Boards This style of PTFE/woven fiberglass/ceramic filled laminate AD1000 material is used ...
2026-04-13 05:31:19
|
|
... Fi Antenna. It’s a 2 layer flex board at 0.15mm thick. It contains yellow coverlay (solder mask) and without silkscreen on entire board, and ...
2026-04-13 05:31:19
|
|
.... It’s a 2 layer board at 0.15mm thick. The base laminate is from ITEQ, It's fabricated per IPC 6012 Class 2 using supplied Gerber data. Immersion ...
2026-04-13 05:31:19
|
|
... on FR-4 Tg175℃ substrate for the application of Satellite Radio. It's 1.6 mm thick with white silkscreen(Taiyo) on green solder mask (Taiyo) and ...
2026-04-13 05:31:19
|
|
... on FR-4 Tg170 substrate for the application of GPS Tracking Devices. It's 1.6 mm thick with white silkscreen on green solder mask and immersion ...
2026-04-13 05:31:19
|
|
Rogers 4360 High Frequency PCB 16mil Double Sided RF PCB with Green Mask and Immersion Gold for Small Cell Transceivers (PCB's are custom-made ...
2026-04-13 05:31:19
|