91 - 100 of 195
2 layer immersion silver circuits pcb
Selling leads
|
...) General Description This is a type of antenna PCB that built on specialty antenna laminates AD255C. It’s a double layer board with antenna pads ...
2026-05-28 07:30:16
|
|
... for reference) Brief Introduction This is a type of low DK/DF FR-4 PCB which is built on TU-872 SLK Sp material. It is made on 4 layers copper ...
2026-05-27 18:53:55
|
|
...just for reference) General Description This is a type of low weight antenna PCB made on Taconic TLY-5Z substrate with 30mil thickness, starting 0...
2026-05-27 18:51:37
|
|
...layer rigid high-frequency PCB fabricated with Wangling TF300 high-performance dielectric substrate, designed for high-stability microwave and ...
2026-06-24 15:01:25
|
|
...PCB 4-Layer Thin PCB 0.4mm Multilayer FR-4 PCB With Immersion Gold for GPS Module 1.1 General description This is a type of 4 layer printed circuit ...
2026-05-27 18:53:52
|
|
...built on FR-4 Tg170 substrate for the application of Wireless Communication. It's 1.6 mm thick with white silkscreen on green solder mask and ...
2026-05-29 14:59:27
|
|
...PCB Double Layer 20mil 0.508mm With Immersion Gold (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for ...
2026-05-28 07:30:16
|
|
... range of RF applications. This material is versatile due to its 2.45 - 2.65 DK range and available thicknesses and copper cladding. It is suitable ...
2026-05-28 07:30:16
|
|
... shown are just for reference) Hello Everyone, Today we’re going to talk about RO3003 high frequency PCBs. RO3003 high frequency circuit laminates ...
2026-06-09 09:54:58
|
|
...Circuit Board (PCB) Made on S1000-2M With Immersion Gold and 90 Ohm Impedance Control (Printed Circuit Boards are custom-made products, the picture ...
2026-05-29 14:59:24
|