11 - 20 of 718
20mil rogers pcb board
Selling leads
|
... Rogers PCB Built on 30.7mil RO4350B LoPro Reverse Treated Foil With ENIG for Digital Applications (Printed Circuit Boards are custom-made products...
2026-04-13 05:31:19
|
|
Rogers PCB Made on RO3035 10mil 0.254mm DK3.5 with Immersion Gold for Patch Antenna for Wireless Communications (Printed Circuit Boards are custom...
2026-04-13 05:31:19
|
|
Double Layer Rogers PCB Built on 32.7mil RO4003C LoPro Reverse Treated Foil for Cellular Base Station Antennas RO4003C LoPro laminates use a ...
2026-04-13 05:31:19
|
|
Dual Layer Rogers PCB Built on 30.7mil RO4350B LoPro Reverse Treated Foil With ENIG for Digital Applications RO4350B LoPro laminates use a proprietary ...
2026-04-13 05:31:19
|
|
Dual Layer Rogers PCB Built on 60.7mil RO4350B LoPro Reverse Treated Foil With ENIG for High Speed Back Planes RO4350B LoPro laminates use a ...
2026-04-13 05:31:19
|
|
Rogers High Frequency PCB Built on RT/Duroid 6010 With Immersion Gold for Ground Radar Warning Systems (Printed Circuit Boards are custom-made ...
2026-04-13 05:31:19
|
|
... are just for reference) RO4360G2 laminates of Rogers Corporation are 6.15 Dk, low loss, glass-reinforced, hydrocarbon ceramic-filled thermoset ...
2026-04-13 05:31:19
|
|
...PCB Built On 10mil Rogers TC350 With Immersion Gold for Microwave Combiners. (Printed Circuit Boards are custom-made products, the picture and ...
2026-04-13 05:31:19
|
|
Rogers 15mil TMM10 High Frequency PCB With Immersion Gold and Green Solder Mask for Chip Testers (Printed Circuit Boards are custom-made products, the ...
2026-04-13 05:31:19
|
|
... shown are just for reference) Rogers RT/duroid 6002 microwave material was the first low loss and low dielectric constant laminate to offer ...
2026-04-13 05:31:19
|