31 - 40 of 212
1oz copper pcb
Selling leads
|
...just for reference) General Description This is a type of antenna PCB made on Rogers RO4535 with 30mil substrate, starting 0.5oz copper, finished ...
2026-04-13 05:31:19
|
|
... product are for reference only. This particular high frequency PCB is an antenna type that is manufactured using Rogers RO4534 with a 20mil ...
2026-04-13 05:31:19
|
|
...PCB is a 6-layer copper structure, and its material composition mainly includes RO4003C core, RO4450F prepreg and copper foil. PCB Details ...
2026-04-13 05:31:19
|
|
...1oz copper weight and black solder mask printed on both top and bottom side.Pads are plated with electroless nickel and immersion gold (ENIG). ...
2026-04-13 05:31:19
|
|
...PCB Built on TU-768 With 1.2mm Thick Coating Immersion Gold Multilayer TU-768 PCB (Printed Circuit Boards are custom-made products, the picture and ...
2026-04-13 05:31:19
|
|
...Brief Introduction This type of immersion gold RF PCB is made on AD1000 material, PTFE/Woven Fiberglass/Ceramic Filled Laminate. The circuit board ...
2026-04-13 05:31:19
|
|
...905mm RF PCB With Pure Gold Plated. (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) ...
2026-04-13 05:31:19
|
|
... shown are just for reference) Brief Introduction This is a type of Taconic high frequency PCB using RF-35A2 substrate which is ultra low loss ...
2026-04-13 05:31:19
|
|
...PCB with Blue Solder Mask Coating Immersion Silver on Pads (Printed Circuit Boards are custom-made products, the picture and parameters shown are ...
2026-04-13 05:31:19
|
|
...AD1000 Immersion Gold RF PCB 1.27mm 2 Layer Circuit Boards This style of PTFE/woven fiberglass/ceramic filled laminate AD1000 material is used to ...
2026-04-13 05:31:19
|