201 - 210 of 230
10mil double layer immersion gold pcb
Selling leads
|
...layer CuClad 233 PCB 20mil Thick with Immersion Gold Finish This 2-layer rigid PCB, constructed with Rogers CuClad 233 as its base material, is ...
2026-05-27 18:53:15
|
|
... on top side and bottom side, plated through holes connect each layer. Viewing from the stack-up, each dielectric material is more than 0.2mmm ...
2026-06-09 09:54:59
|
|
...substrate with Tg 135°C for the application of GPS Tracker For Kids. It's only 0.5 mm thick without silkscreen on yellow solder mask (Taiyo) ...
2026-05-27 18:53:51
|
|
...PCB 0.8mm Thick 2-Layer 1OZ with Immersion Gold This high-performance 2-layer rigid PCB is crafted from TSM-DS3, a ceramic-filled reinforced ...
2026-05-27 18:51:11
|
|
.... The 1oz copper on both sides ensure superior conductivity and signal transmission quality. No solder mask or silkscreen characters are applied. ...
2026-05-27 18:53:09
|
|
...PCB 10 Layers 10-layer Quality Circuit Board Built on High Tg FR-4 for PLC Control Panel 1.1 General description This is a type of 10 layer printed ...
2026-05-29 14:59:28
|
|
...layer rigid high-frequency PCB is fabricated with Wangling WL-CT300 thermosetting dielectric substrate, engineered for high-reliability RF, ...
2026-06-24 15:01:24
|
|
... single layer MCPCB board at 1.6 mm thick with 1 W/MK thermal conductivity. The aluminum plate is from ITEQ, Solder mask and silkscreen from Taiyo. ...
2026-05-29 14:59:50
|
|
This 2-layer rigid RF PCB is built with Rogers RO4533—a ceramic-filled, glass-reinforced hydrocarbon material—and features an Immersion Gold surface ...
2026-05-29 14:59:17
|
|
Utilizing Rogers RO3003 high-frequency laminate as the base material, this PCB is tailored for commercial microwave and RF applications. RO3003 is a ...
2026-05-27 18:51:17
|