221 - 230 of 247
wireline knuckle joint tool string
Selling leads
|
2 Inch Wireline Brush Gauge Cutter Slickline Tools I.Introduction The Wireline Brush is used to brush out scale, waxes or packing debris from the ...
2024-12-09 13:22:13
|
|
Alloy Steel 2ft Wireline Brush Gauge Cutter Slickline tools Ⅰ. Overview: Wireline brush is used to brush away the dirt, paraffin and filling rock ...
2024-12-09 13:22:13
|
|
2.25 inch N-Test Tool Running Tools Wireline Tools Lock Mandrel I.Overview The N-Test Tool is used to pressure test the line above the threaded joint ...
2024-12-09 22:47:42
|
|
... downward and is usually is used to throw and fishing the lock cylinder, packer, bridge plug and others with inner fishing necks. After connecting ...
2024-12-09 13:22:13
|
|
...used to throw and fishing the lock cylinder, packer, bridge plug and others with inner fishing necks. After connecting the GU joint (upward shear ...
2024-12-09 13:51:51
|
|
...Tools Wireline Pulling Tool I. Introduction: A GS type pulling tool is used to pull inner fishing necks, which can cut off and release an object ...
2024-12-09 17:08:26
|
|
... into the X/XN-type seating joints in the well. II.Technical parameters of common specifications: Nominal Size Actual OD Fishing Neck Top ...
2024-12-09 13:40:21
|
|
... sliding sleeves. The selection key can be used as a non-self-release type but released by a shear pin. B-type self-release tools cannot pass ...
2024-12-09 17:05:03
|
|
Wireline Running F Collar Stop Tools 2-7/8Inch～4-1/2Inch Slickline Tools Introduction The F collar stop tools is mainly composed of an upper joint, ...
2025-10-29 00:15:29
|
|
Wireline Lock Mandrel RZG plug I. Overview: The RZG plug can choose to be placed in the downhole joint, and has the characteristics of two-way balance...
2024-12-09 17:06:32
|