201 - 210 of 247
wireline knuckle joint tool string
Selling leads
|
GR Pulling Tool Wireline Pulling Tool I. Overview: GR type fishing tool is composed of GU joint (upward shear joint) and GS type fishing tool (without ...
2024-12-09 13:43:48
|
|
...Tool Wireline Pulling Tool I. Introduction: A GS type pulling tool is used to pull inner fishing necks, which can cut off and release an object ...
2024-12-09 13:42:17
|
|
...used to throw and fishing the lock cylinder, packer, bridge plug and others with inner fishing necks. After connecting the GU joint (upward shear ...
2024-12-09 13:42:17
|
|
...Tool Catcher 70Mpa 10K H2S Wireline Pressure Control Equipment Overview The hydraulic tool catcher is composed of a body, a mandrel, a fish claw, a ...
2026-06-19 00:13:05
|
|
... Releasable Collet Type Bulldog Spear is composed of an upper joint, a mandrel, an auxiliary spring seat, an outer cylinder, a cone and slips. The ...
2024-12-09 13:22:13
|
|
Wireline Releasable Collet Type Bulldog Spear Wireline Fishing Tool I. Overview: Wireline Releasable Collet Type Bulldog Spear is used to fish the ...
2024-12-09 13:42:17
|
|
...connected to the tool string and run down the well. The lower end of the sand bailer is inclined, which is conducive to the well. Its working ...
2024-12-09 23:37:06
|
|
... only. The 2.75 BO Selective Shifting Tool is designed to selectively shift the inner sleeve of a sliding side door circulating device into the ...
2024-12-09 13:22:23
|
|
...remove the tools within. When this joint is reconnected it is normal practice to fill and pressure test the entire lubricator system prior to ...
2024-12-09 13:22:13
|
|
...Inch X XN Wireline Lock Mandrel Running Tool X/XN Lock Mandrel Wireline Running Tool I．Introduction An X/XN lock mandrel is used to install flow ...
2024-12-09 13:22:23
|