181 - 190 of 247
wireline knuckle joint tool string
Selling leads
|
... joint, a stop ring, an upper sleeve, a locking nut, a stop nut, a skirt cover, a stop ring, a core, a spacer ring, a slide block, a dog , a main ...
2024-12-09 22:39:11
|
|
...tools Wireline Pulling Tool GS hydraulic labor tools Wireline Pulling Tool is used to pull inner fishing necks, which can cut off and release an ...
2025-04-07 11:25:45
|
|
...Wireline Fishing Tool I. Overview: The GO Devil Cutter Bar type is used to cut the stuck tool string wire. The GO Devil Cutter Bar type is composed ...
2024-12-09 13:22:51
|
|
.... If there is no foreign matter on the rope cap, the inclined plane of the cutter will directly cut the steel wire on the rope cap. When the steel ...
2024-12-09 13:49:41
|
|
... and a guide surface. It goes down the well in a conventional manner, and if there are no foreign objects on the cap, the bevel of the cutter will ...
2026-06-19 00:13:05
|
|
Wireline Slickline Tools Mechanical Spang Jar QLS 1.5inch～2.5inch Product overview The Mechanical Spang (Link)Jar are mainly used to cut the pins ...
2024-12-09 23:20:31
|
|
...Wireline Pulling Tool Alloy Steel Material GS Pulling Tool Wireline Pulling Tool I. Introduction: The GS type pulling tool is used to pull inner ...
2024-12-09 13:22:13
|
|
...Wireline Pulling Tool Slickline Service GS Pulling Tool Wireline Pulling Tool I. Introduction: The GS type pulling tool is used to pull inner ...
2024-12-09 13:22:13
|
|
... downward and is usually is used to throw and fishing the lock cylinder, packer, bridge plug and others with inner fishing necks. After connecting ...
2024-12-09 13:22:13
|
|
...Wireline Pulling Tool Nickel Alloy Material GS Pulling Tool Wireline Pulling Tool I. Introduction: A GS type pulling tool is used to pull inner ...
2024-12-09 13:22:13
|