High Efficient Carton Flow Racking With Continuous Inventory Rotation

High Efficient Warehouse Pallet Flow Racking For Industry Storage

Pallet flow racks, or flow racks, is a pallet storage method that uses gravity and wheels or rollers, to convey and accumulate pallets in a storage module. Regarding gravity pallet racking, by using a roller rail system or pallet with roller and under the influence of gravity, the “first in And first out” of goods is achieved. It is suitable for storing large quantities.

Of goods of the same kind .tanking full advantage of storage space. It is especially suited for goods which a short quality guarantee period and can’t be pressed for a long time. In order to get the goods to move freely, the racking Should be equipped with a brake if the slope is long; in order not to make the goods turn over when racking to the bottom under great dash The lower end of the slope should be equipped with separators and a buffer. The loading capacity is less than 1000kg per pallet.

Configuration of the system:

(1)  Live racking, which operates on a first-in, first-out basis, offers incredibly high levels of storage density in a specific space.

(2) Pallets are put onto incline gravity rollers that have fixed lanes and a fixed grade. The next pallet rolls into position as the picking face removed the pallet, and replenishment stock is loaded at the other end of the lane.
As a result, stock rotation occurs automatically with the least amount of forklift movements.

Benefits of Pallet Flow Racking System:

♦Systems for pallet flow storage offer increased throughput. As soon as a product is entered into the system, it "automatically" goes forward, necessitating minimal product handling.

♦Because just two aisles are needed to load and unload, there is an improvement in density.

♦Systems for pallet flow storage reduce product and forklift damage.

♦Use to position outbound truck loads in the shipping area.

Matters Need Attention

The total depth of the shelf (namely the length of the guide rail) should not be too large, otherwise the unused upper and lower "dead corners" will be large, affecting the use of space, and the ramp is too long, the controllability of the slide will be poor, the momentum of the slide is large, easy to cause the decline, block, the role of the pallet goods.

In order to make the slide smooth, if the ramp is long, the damping device should be added in the middle, in order to make the pallet goods slide to the bottom end and not roll due to the excessive impact force, the buffer device and the pickup separation device should be set at the lowest point of the ramp, so the design, manufacture, installation is difficult, the cost is high. This kind of shelf should not be too high, generally, within 6 meters, the weight of the single support cargo is generally within 1000KG, otherwise, its reliability and operability will be reduced.

Ironstone supplies a whole package of rack system products and services. We combine our superior selection of high-quality products with professional, first-rate service. We can help you select the right options for your particular storage needs and provide additional support to help you install your warehouse racking system. Contact us to get your personal design now!