81 - 90 of 120
through shaft stepper motor 25mm
Selling leads
|
...stepper motor Description: This is 8mm diameter PM stepper motor with lead screw on top. Lead screw type is M1.7*P0.3 M1.7*P0.3 is very uncommonly ...
2025-08-01 00:14:49
|
|
... motor slider is plastic, we also have metal sliders for customers to choose. Since the output shaft of the motor is a lead screw, during the ...
2025-08-01 00:14:48
|
|
... and the lead screw supported by the lead screw rotate to generate thrust. The basic step angle of the motor is 18 degrees, and the motor runs 20 ...
2025-08-01 00:14:48
|
|
... that provides a wide range of gear reduction ratios from 1:10 to 1:1000. It is designed to operate in a wide temperature range from -0 to +55 ℃, ...
2025-08-01 00:14:48
|
|
...Motor High Torque GM12-15by Stepper Gear Motor Small Volume With Mini Horizontal Metal Gear Box 15mm stepper motor attached with 1812 worm gearbox ...
2025-08-01 00:14:48
|
|
...degrees step angle PM stepper motor with lead screw and nut Description: SM1063 is 10mm diameter stepper motor with lead screw. Lead screw is M3*P1...
2024-12-09 17:14:42
|
|
..., high in precision, easy to design and install, and widely used in automation equipment. There is a manual nut (brass nut) at the bottom of the ...
2025-08-01 00:14:48
|
|
... motor is small, the selection range of the reduction ratio is wide, and the angle between the output shaft and the motor bearing is 90 degrees, ...
2025-08-01 00:14:48
|
|
...stepper motor attached with 1812 worm gearbox This series of geared motors is assembled using SM15 stepper motor and 1812 precision metal worm gear ...
2025-08-01 00:14:48
|
|
...0.3mm. Passing through the screws, the screw rod supports the turning of the screw to the thrust. The basic step of the motor is 9 degrees, and the ...
2025-08-01 00:14:48
|