Changzhou Vic-Tech Motor Technology Co., Ltd.

Focus on quality,

customer first,

continuous improvement,

continuous struggle

Our company has a professional engineer team with 20 years of experience in the industry. We can develop products according to the needs of customers, and can also develop products in collaboration with the customer engineer team. In this way, customers can avoid improper selection of motors or inappropriate costs in the early stage of product development. At the same time, in the early stage of development, the production feasibility and production convenience of the product were considered to the greatest extent, so the follow-up laid a good foundation for providing customers with high-quality and low-cost products.

For the smooth development of customers and our business, please refer to the flow chart below, cooperate with us, and carry out the development of new products in an orderly manner in stages and steps.

STEP 1:

At this stage, customers can provide information such as product design ideas and instructions for use according to their needed

. such as the basic action requirements, basic strength requirements, and basic space requirements for the motor.

It can be provided by email description, preliminary drawings, illustration pictures, related videos, animation demonstrations, etc.

If necessary, video conference demonstrations can be provided to us, so as to let us know the needs of customers to the greatest extent, which will help the successful development of the project. a solid foundation.

STEP 2:

According to the communication and communication in the first step, please provide conceptual design sketches, 3D drawings, or descriptions of important indicators and requirements of the project.

Our company designs preliminary drawings according to these requirements. Generally speaking, we will use the current standard products as the reference benchmark. This will greatly reduce the cost of post-production after design.

STEP 3:

On the basis of the previous communication, the customer and us will initially come to the preliminary design of the scheme,.

Then the scheme will finally form technical documents such as drawings.

The customer reconfirms whether the parameters such as space and strength are satisfied from the perspective of use.

We will confirm the feasibility of production, cost feasibility, etc. from the perspective of product production.

This can ensure that the product can meet the requirements from production to use.

STEP 4:

Confirmed preliminary plans and sketches. At this stage, complete 3D drawings, 2D drawing and other formal documents should be produced.

These documents need to be confirmed and signed by both parties. Follow-up work will be carried out in accordance with these confirmed drawings and documents to avoid objections and follow-up changes.

When some needed changing  occurs, corresponding changes and confirmations must be made in the drawings and other documents.

STEP 5:

According to the approved information and data, various feasible methods are used for processing different parts.

According to the necessity of assembly, make temporary available simple jig, and then carry out assembly and test, the assembly test meets the design requirements and submit the product to the customer for further testing, certification, etc.

STEP 6:

After the samples are produced and tested by our company, the samples that meet the preliminary design requirements will be provided to customers for assembly and testing.

At the same time, our company retains some samples, and after the customer's test is completed, according to the customer's test results, it is convenient to carry out necessary testing, analysis and improvement confirmation.

STEP 7:

After the sample test passes the customer's inspection, the relevant design for mass production can be carried out, including two-piece design, assembly process design, failure mode analysis, tooling design, special equipment design and production, mold design and production, etc.

STEP 8:

Before mass production, we will inspect and approve the parts that open the mold, verify the newly produced fixtures, and accept the newly designed and produced equipment.

Then, samples are submitted for final confirmation before mass production, followed by 1-2 small batch trial production, and finally enter the mass production stage.

The photo of main assembly line process

According to the operation process of the product, the assembly line has assembly and testing procedures, which can ensure the correct assembly of the product and a comprehensive inspection.

Vic-Tech Motor Quality Control Process：

IQC:

Although there are purchased raw materials, after the parts arrive at the company, they must first undergo quality inspection to ensure that they meet the requirements of drawings and standards, and then put them into storage for use. If the materials and parts are found to be unqualified, they shall be sorted, downgraded or returned to the supplier according to the specific cir cutumstances.

IPQC:

During the production process, we will conduct random inspection and control on the relevant parameters of the component itself and important indicators to ensure that the component itself meets the requirements.

FQC:

After the assembly of the product is completed, the quality department will conduct a specified number of sampling inspections on each batch of products to confirm that the parameters of the products meet the requirements of the drawings and standards. So as to ensure that the products provided to customers are in line with the requirements.

Vic-Tech Motor Quality Control Flow Chart：

Regular evaluation by external professional organizations：

In order to ensure that the product quality meets the requirements of relevant standards, our company will regularly send samples to external professional testing institutions to test the products. In this way, the deviation of product control caused by problems such as testing methods and testing methods within the company can be avoided, and the testing methods of products can be guaranteed to the greatest extent.

The main technical personnel of the company have worked in related industries for more than 10 years, and have working experience in foreign companies such as Japan, South Korea, Europe and the United States, and have working experience in domestic listed companies. Have systematic product development ability, perfect project