21 - 30 of 120
through shaft stepper motor 25mm
Selling leads
|
... and gearbox. The height of stepper motor 42mm and we have multiple height for choosing. The gear ratio is 49:1, and gear ratio is adjustable based ...
2024-12-09 17:14:42
|
|
... the same time ,the lead will rotating. motor stepper step angle is 7.5 degree (also this can be 15 degree) lead pitch is 0.6096mm (there oprional ...
2024-12-09 17:14:42
|
|
... to 101mm height. Motor’s weight and torque is related to its height. Motor’s standard output shaft is D shaft shaft, it can also be replaced with ...
2025-07-23 00:16:38
|
|
... bigger height, motor has bigger torque. Please choose suitable height based on your space and torque requirement. Motor’s shaft is round shaft, ...
2025-07-23 00:16:38
|
|
... other gear ratios for to you choose, and it depends on your project requirement. Step angle of single motor is 7.5 degrees, and it takes 48 steps ...
2025-07-23 00:16:38
|
|
...shaft PM stepper motor Description: This is a 20mm PM stepper motor attached with a cylinder gearbox. We have different gear ratios for choosing, ...
2024-12-09 17:14:42
|
|
... shaft is 3.9mm length 1mm diameter round shaft, and it can be customized into D shaft. Standard coil resistance is 21Ω/phase, and we can change it ...
2025-07-23 00:16:38
|
|
...shaft 5V DC 18° angle stepper motor Description: This stepper motor (VSM0620) is 6mm diameter, and it has about 1.2 g*cm of pull-out torque. Due to ...
2025-07-23 00:16:38
|
|
...Stepper Motor 4 Bare Pins D Shaft 5V DC 18° Angle 4 Pins Description: This stepper motor (VSM0620) is 6mm diameter, and it has about 1.2 g*cm of ...
2025-07-23 00:16:38
|
|
...shaft 5V DC 18° angle stepper motor Description: This stepper motor (VSM0620) is 6mm diameter, and it has about 1.2 g*cm of pull-out torque. Due to ...
2025-07-23 00:16:38
|