41 - 50 of 119
geared stepper motor with lead screw
Selling leads
|
.... Since the output shaft of the motor is a lead screw, during the rotation of the lead screw, the lead screw drives the slider to move back and ...
2025-07-19 00:22:13
|
|
...be customized, and the lead screw length can be adjusted according to the customer's space and travel distance requirements. In addition, we do not ...
2025-07-19 00:22:13
|
|
...geared reducer magnet stepper motor Description: This is a 35mm permanent magnet motor with a gearbox. Motor’s output torque and speed is related ...
2025-07-19 00:22:13
|
|
... to motor’s gear ratio. The gear ratio for this current model is 30:1. The motor is commonly used on medical equipment and electrical locks. You ...
2025-07-19 00:22:13
|
|
... the same time ,the lead will rotating. motor stepper step angle is 7.5 degree (also this can be 15 degree) lead pitch is 0.6096mm (there oprional ...
2024-12-09 17:14:42
|
|
... commonly used triangle lead screw. Customer can change lead screw into other types, such as M2*0.4P and trapezoidal screw. If customers think the ...
2024-12-09 17:14:42
|
|
...stepper motor with run through lead screw SM25-Linear stepping motor with lead screw, when the rotor is running CW or CCW, the lead screw will move ...
2024-12-09 17:14:42
|
|
..., through-axis, and through-fixed-axis. You can choose according to your specific needs. ACME lead screw stepper motor converts rotary motion to ...
2024-12-09 20:00:27
|
|
...screw 18 degrees PM linear stepper motor with hexagonal nut Description: This is a 15mm diameter stepper motor attached with a lead screw and nut. ...
2025-07-19 00:22:13
|
|
...0.5mm, and the lead screw and the lead screw supported by the lead screw rotate into thrust. The basic step angle of the motor is 18 degrees, and ...
2025-07-19 00:22:13
|