Small Slider Stepper Motor 4.6VDC 6mm Miniature Linear Motor

6mm micro slider screw stepper motor 4.6V DC pm stepper motor of Camera Lens linear stepper motor:

This is a small stepper motor equipped with a bracket, lead screw and relative motion slider.

Since the output shaft of the motor is a lead screw, during the rotation of the lead screw, the lead screw drives the slider to move back and forth. This conveniently provides actions such as forward and backward. In addition, the stepping motor can precisely control the speed, the number of revolutions, etc., which also determines the movement speed of the slider, and the movement position is accurately controllable.

Due to its excellent characteristics such as small size, high precision and easy control, this miniature stepping motor is widely used in beauty equipment, medical equipment, vending machines, rapid detection, cameras, optical instruments, lenses, precision medical equipment, automatic doors locks, etc.
The input part of the motor is a PCB, but it can be changed to the form of connecting wire, FPC, etc. according to customer needs.

Main Application

1) vending machine

2) Optical instruments

3) Precision medical devices

4) beauty equipment

Other precise control application

6mm M2 lead screw slider stepper motor Specifications:

Drawing of 6mm plastic slider stepper motor with 6mm stroke:

TYPE of WIRE CONNECT:

Motor input method with Pin type

, FPC, PCB, Lead wire etc. These can be customized according to customer needs.

Product display for 6 mm plastic slider stepper motor:

6mm mini linear motor 4.6V DC micro slider screw stepper motor of Camera Lens

Customers can customize content:

1. The outer diameter of the motor can be selected in different sizes such as 6 8 10 15 20 25mm according to the customer's use environment and space strength.

2. The outlet position can be freely selected within a 360-degree range to meet the installation requirements in the best state. At the same time, the connector can choose lead, PCB, FPC bare pin.

2. According to customer requirements, the effective stroke of the motor can be customized within a certain range, mainly considering the diameter and length of the lead screw.

Usually the maximum length of M2 screws can be 50mm, M3 screws can be 100mm, and M4 screws can be 100mm. 150mm can also be achieved. Small motors use lead screws with too large diameters, which consume a lot of power. Therefore, customers should consider comprehensively when selecting motors.

4. The material of the slider is generally plastic, which is easy to form and economical.

When customers have special use environment and requirements, the slider can also use metal parts.

Of course, the cost will be relatively high, which is determined according to the customer's requirements for the shape and size of the slider.

Packaging and Shipping Diagram: