141 - 150 of 297
57mm stepper motor
Selling leads
|
...gear ratio, and gear ratio is 32:1 This motor is a typical unipolar motor with 5 cables, and the red cable is common cable. This motor has cheap ...
2025-07-26 00:14:22
|
|
...reduction ratio can be customized according to customer needs. The basic step angle of the motor is 18 degrees, that is, 20 steps per revolution, ...
2024-12-09 17:14:42
|
|
10mm Geared Stepper Motor 5V Horizontal Right Angle Motor 2 Phase Mini Gear Motor SM10-817G is series 1024GB reducer motor is the use of 10MM stepper ...
2025-07-26 00:14:22
|
|
... degrees, it takes 20 steps to rotate exactly one turn. The thrust of this motor is about 120~150 grams (1.2~1.5N of thrust), with suitable ...
2025-07-26 00:14:22
|
|
...stepper motor This VSM0652 stepper motor is linear motor with slider, designed for micro electronic products. The lead screw is M1.7*P0.3, pitch is ...
2025-07-26 00:14:22
|
|
...25mm permanent magnet linear motors. It has the common parameter characteristics of stepper motors. For example: basic size, step angle, number of ...
2025-07-26 00:14:22
|
|
... final motor rotation angle resolution can reach 0.05~6 degrees, can be used in many requirements Precise control of the rotating position of the ...
2024-12-09 17:29:43
|
|
... thrust, which can be directly used as an actuator to achieve the action required by customers. The basic angle of the stepping motor is 18 degrees...
2025-07-26 00:14:23
|
|
... is about 39 mm. 0.02mm per step Resistance 10 Ohms Recommended driving voltage 3.3V-5V DC The pull-out thrust of this motor is about 120g Min ...
2025-07-26 00:14:22
|
|
... ratio combinations for you to choose. The output shaft is a round shaft with a slot. Motor’s output torque is related to motor’s length and gear ...
2025-07-26 00:14:22
|