121 - 130 of 297
57mm stepper motor
Selling leads
|
..., through-axis, and through-fixed-axis. You can choose according to your specific needs. ACME lead screw stepper motor converts rotary motion to ...
2024-12-09 20:00:27
|
|
... bigger height, motor has bigger torque. Please choose suitable height based on your space and torque requirement. Motor’s shaft is round shaft, ...
2025-07-26 00:14:22
|
|
..., high in precision, easy to design and install, and widely used in automation equipment. There is a manual nut (brass nut) at the bottom of the ...
2025-07-26 00:14:22
|
|
...revolution. The height of the motor is 34mm, we also have 40mm and 48mm height for customers to choose. The higher the height of the motor, the ...
2025-07-26 00:14:22
|
|
... motor is small, the selection range of the reduction ratio is wide, and the angle between the output shaft and the motor bearing is 90 degrees, ...
2025-07-26 00:14:22
|
|
...stepper motor attached with 1812 worm gearbox This series of geared motors is assembled using SM15 stepper motor and 1812 precision metal worm gear ...
2025-07-26 00:14:22
|
|
...stepper motor with gearbox Description: This is a 20mm stepper motor fitted with a gearbox. The stepping angle of a single 20mm motor is 18°/step. ...
2025-07-26 00:14:22
|
|
...stepper motor Description: Model No. 35BYJ46 motor is our standard unipolar 4 phase stepper motor with gearbox on top. The red cable is common line ...
2025-07-26 00:14:23
|
|
.... The step angle of a single motor is 3.75°/step. It has a top gear ratio of 42.5, so the step angle is 3.75°/42.5. This motor is suitable for 12V ...
2025-07-26 00:14:23
|
|
...standard M2*P0.4 lead screw, and motor step angle is standard 18 degrees. Thus it takes 20 steps to rotate one turn, and motor’s step length is 0...
2024-12-09 17:14:42
|