201 - 210 of 314
35mm geared stepper motor
Selling leads
|
...stepper motor This VSM0652 stepper motor is linear motor with slider, designed for micro electronic products. The lead screw is M1.7*P0.3, pitch is ...
2026-04-16 00:33:41
|
|
...25mm permanent magnet linear motors. It has the common parameter characteristics of stepper motors. For example: basic size, step angle, number of ...
2026-04-16 00:33:42
|
|
... thrust, which can be directly used as an actuator to achieve the action required by customers. The basic angle of the stepping motor is 18 degrees...
2026-04-16 00:33:42
|
|
... is about 39 mm. 0.02mm per step Resistance 10 Ohms Recommended driving voltage 3.3V-5V DC The pull-out thrust of this motor is about 120g Min ...
2026-04-16 00:33:42
|
|
...Stepper Motor NEMA34 1.8 Degree Step Angle With Lead Screw Description: This is a 86mm hybrid stepper motor with trapezoidal screw. Step angle is 1...
2026-04-16 00:33:42
|
|
... and the range is generally between 20~51mm. It can be re-evaluated after special request. Hybrid stepping motor has the advantages of high control ...
2026-04-16 00:33:42
|
|
...stepper motor with round shaft Description: This is 42mm NEMA17 hybrid stepper motor. Step angel is 1.8° It takes 200 steps to rotate one turn. The ...
2026-04-16 00:33:42
|
|
...stepper motor Motor basic step angle is 18 degrees, that is, 20 steps per turn, plus the deceleration box deceleration effect, the final motor ...
2026-04-16 00:33:42
|
|
...stepper motor Description: This stepper motor (VSM0620) is 6mm diameter, and it has about 1.2 g*cm of pull-out torque. Due to the small size, it ...
2026-04-16 00:33:42
|
|
.... The needs of customers are the direction of our efforts, and meeting the needs of customers will be our highest pursuit. If you have needs, ...
2026-04-16 00:33:42
|