191 - 200 of 314
35mm geared stepper motor
Selling leads
|
...Stepper Motor is a kind of stepper motor with slider. It adopts bipolar drive mode and has a wide operating temperature range from -10°C to +60°C. ...
2024-12-09 19:30:15
|
|
..., through-axis, and through-fixed-axis. You can choose according to your specific needs. ACME lead screw stepper motor converts rotary motion to ...
2024-12-09 20:00:27
|
|
... bigger height, motor has bigger torque. Please choose suitable height based on your space and torque requirement. Motor’s shaft is round shaft, ...
2026-04-16 00:33:42
|
|
..., high in precision, easy to design and install, and widely used in automation equipment. There is a manual nut (brass nut) at the bottom of the ...
2026-04-16 00:33:42
|
|
...revolution. The height of the motor is 34mm, we also have 40mm and 48mm height for customers to choose. The higher the height of the motor, the ...
2026-04-16 00:33:42
|
|
...standard M2*P0.4 lead screw, and motor step angle is standard 18 degrees. Thus it takes 20 steps to rotate one turn, and motor’s step length is 0...
2024-12-09 17:14:42
|
|
...0.3mm. Passing through the screws, the screw rod supports the turning of the screw to the thrust. The basic step of the motor is 9 degrees, and the ...
2026-04-16 00:33:41
|
|
...choose from: 32mm, 45mm, 51mm. The higher the height of this motor, the higher the motor torque. Please select the appropriate height according to ...
2026-04-16 00:33:42
|
|
... screw with a pitch of 0.4mm, and the lead screw and the lead screw supported by the lead screw rotate into thrust. The basic step angle of the ...
2026-04-16 00:33:41
|
|
... degrees, it takes 20 steps to rotate exactly one turn. The thrust of this motor is about 120~150 grams (1.2~1.5N of thrust), with suitable ...
2026-04-16 00:33:42
|