211 - 220 of 359
80t injection molding cold runner
Selling leads
|
...s mold is tailored for accurate injection molding. Boasting a tool life of 500,000 shots, it is engineered to withstand long production runs ...
2026-06-18 00:29:33
|
|
...mold base utilized is the standard mold base identified by part number FCI2530.608080, featuring dimensions of 300mm in length, 300mm in width, and ...
2024-12-09 23:34:49
|
|
... loss, easier to fill the mold quickly) [Injection/runner type]: Hot runner (no cold slug, saving material cost) [Surface finish]: ☆ Other surfaces ...
2026-06-18 00:29:33
|
|
...a net weight of 99 kg and requires a 100T injection molding machine (IMM) tonnage. Slide 1 This product is a two-plate mold with a cashew gate, ...
2026-06-18 00:29:33
|
|
... particular mold is a three-plates mold, meticulously designed to ensure optimal performance and productivity. It incorporates a pin point gate for ...
2026-06-18 00:29:33
|
|
...94 kg. The injection part is made of PP+40% GF material and uses a cold runner system. The surface finish is polished to SPI B-2 standard. The ...
2026-06-18 00:29:33
|
|
...net weight of 94 kg. This is a two-plate mold with a side gate. The part material is made of PC. It features a cold runner injection system. The ...
2026-06-18 00:29:33
|
|
...251mm. It has a weight of 102 kg and requires a 100T injection molding machine (IMM) tonnage. The gate used is a cashew gate, which is suitable for ...
2026-06-18 00:29:33
|
|
...mold using LKM mold base. Our mold is a two-plates mold with a high-precision cold runner and cashew gate design. It is meticulously crafted to ...
2024-12-09 22:44:19
|
|
.... The mold base used is a standard mold base with a pin point gate. With a tool life of up to 500,000 shots, this three-plate mold incorporates a ...
2026-06-18 00:29:33
|