231 - 240 of 359
80t injection molding cold runner
Selling leads
|
...mold size is 400 X 500 X 511mm. The part material is PC+ABS. The mold is designed with cold runner,harden cavity and core with 1*1/S136, and the ...
2026-06-18 00:29:33
|
|
...mold part is meticulously crafted using the LKM mold base, ensuring durability and precision. The mold is designed with a cold runner system, ...
2026-06-18 00:29:33
|
|
... and manufactured) by Chitwing, with cold runner, surface with VDI21# etch, uniform mold wall thickness and high hardness; harden the cavity and ...
2026-06-18 00:29:33
|
|
...standard, with good machining and a scientific design that minimizes heat loss. The gate used is a cashew gate. The tool life of the mold is up to ...
2026-06-18 00:29:33
|
|
key (1*8) No.19017-B The Chitwing two-plates mold, employing an LKM mold base, offers exceptional performance and durability. Featuring a side gate ...
2026-06-18 00:29:33
|
|
Transparent Earphone Terminal (1*8) No.23570 Mold size Standard Type Slide Mold net weight IMM Tonnage 110x330x125 LKM Two-plates mold 2 27.54kg 60T ...
2026-06-18 00:29:33
|
|
...mold base P/N: FCI3045.70100100. 350 X 450 X 376mm 362KG IMM tonnage: 180T Gate Sub gate Pin point gate turns to side gate, sub gate The mold is ...
2026-06-18 00:29:33
|
|
Front cover (1*1) No.22682 Mold size (mm) L W H Mold standard LKM Type Three-plates mold 400 450 351 Mold weight 399.77kg 4 slides/7 lifters/cold ...
2024-12-09 21:52:05
|
|
... kg. The molded part produced this by mold has minimized gate marks and a smooth surface without burrs, meeting the LKM. standard It is a three-ers ...
2026-06-18 00:29:33
|
|
..., and follows the LKM standard. The cavity and core are hardened to provide better anti-wearing performance and hardness. It is a three-plate mold ...
2026-06-18 00:29:33
|