181 - 190 of 252
1x1 cold runner two plate mold
Selling leads
|
...Mold base]:Standard mold base CI2025.507070 [L] 250mm [W] 250mm [H] 251mm [Standard]: LKM [Mold weight]: 102 kg [IMM tonnage]: 100T [Gate]: Cashew ...
2026-06-18 00:29:33
|
|
...Mold size] [Mold base P/N] Length Width Height FCI3035 609080 350 350 331 [Standard]: LKM [Type]: Three-plates mold [Gate]: Pin point gate [Mold ...
2026-06-18 00:29:33
|
|
... gate [Mold net weight]: - 254kg [Steel of cavity & core]: - Harden (1*1/S136) [IMM Tonnage]: - 110T [Part material]: - PC [Part weight]: - 8.3g ...
2026-06-18 00:29:33
|
|
... gate [Mold net weight]: - 254kg [Steel of cavity & core]: - Harden (1*1/S136) [IMM Tonnage]: - 110T [Part material]: - PC [Part weight]: - 8.3g ...
2026-06-18 00:29:33
|
|
...mold base P/N: FCI3350.7011090 Length 400 Net weight Type Three-plates mold Width 500 Injection/runner type Cold runner Height 376 454kg LKM ...
2026-06-18 00:29:33
|
|
.../Runner Type: Cold runner Gate: side gate Type: Two-plates mold Part size: 5.99 X2.7 X27.25mm Surface finish Steel of cavity Steel of core Partial ...
2024-12-09 21:52:05
|
|
... (4) Standard: LKM Gate Type Part material Tool life Side gate Three-plates mold PC+ABS/TPU 500k shots The mold was developed and produced by ...
2026-06-18 00:29:33
|
|
...-54HRC, with high hardness, anti-wearing and anti-corrosion performance and good machinability, low maintenance cost) Injection type Runner type ...
2024-12-09 21:52:05
|
|
...plates mold, designed to perfection. Featuring a pin point gate and a cold runner system, this mold is optimized for precision injection molding. ...
2026-06-18 00:29:33
|
|
...standard, with good machining and a scientific design that minimizes heat loss. The gate used is a cashew gate. The tool life of the mold is up to ...
2026-06-18 00:29:33
|