201 - 210 of 252
1x1 cold runner two plate mold
Selling leads
|
...6mm, and the part weight is 3g LKM Length 350 Type Width 500 Three-plates mold Height 346 2x hot runner valve gates turn to cold runner pin point ...
2024-12-09 21:52:05
|
|
...mold base P/N DCI5060.100150120 Size:600 X 600 X 506 Net weight Features 1108kg 4 x slides [IMM Tonnage: 180T] Standard LKM Surface finish Steel of ...
2026-06-18 00:29:33
|
|
...Mold (LKM standard) ① Size: 300*300*330.2mm ② Net weight: 179.7kg ③ Steel of cavity and core: Harden with S136 Mold surface polished to SPI B-2, Ra ...
2024-12-09 21:52:05
|
|
Transparent seal bracket (1*8) No.22678 Gate Side gate Type Two-plates mold Injection/runner type Cold runner Mold size (mm) Part size (mm) L*W H L*W ...
2024-12-09 21:52:05
|
|
...standard quality, featuring precise machining and a well-thought-out design that reduces heat loss. A cashew gate is utilized as the gate system. ...
2026-06-18 00:29:33
|
|
... and anti-strain performance, reduce maintenance cost and prolong the tool life Steel of core Gate Pin point gate This is a three-plates mold with ...
2024-12-09 21:52:05
|
|
...runner valve gates turn to cold runner pin point gates, standard mold base FCI3050, mold size: 350 X 500 X 346mm Origin: Guangdong, China Part ...
2024-12-09 21:52:05
|
|
... Three-plates mold 【Part material】 - PC/TPU 【Service life】 - Up to 50w shots/time 【Gate】 -Overlap gate + pin point gate 【Features】 - Two-slides ...
2026-06-18 00:29:33
|
|
.../weight Part size IMM Tonnage PA/0.03g 6.21 X 5.61 X 2.91mm 60T Considering the cost and the feasibility, the two-plate mold is designed with cold ...
2026-06-18 00:29:33
|
|
... and facilitate recycling. The mold has a minimized tolerance of 0.01-0.05mm, ensuring high precision and the ability to withstand the expansion ...
2026-06-18 00:29:33
|