201 - 210 of 390
fire hazard testing machine
Selling leads
... for IP4 and IEC60065. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify ...
2024-12-09 10:47:48
|
... II equipment. It conforms to IEC61032 figure 9 Test probe13, IEC60950 figure 2B, IEC60335 and IEC60065 standard requirements. Customizable: It can ...
2024-12-09 10:47:48
|
...Test Probe 14 Test Bar Product information: The test bar conforms to the IEC61032 figure 10 Test probe 14 standard requirement. It is used to ...
2024-12-09 10:47:48
|
...Test Rod ,Test Probe 32 Product information: The test rod probe confirms to IEC61032 figure 15 requirements. It is intended to verify the ...
2024-12-09 10:47:48
|
... which is installed on the device and equipped with parts or components which isolate the hazardous live parts and accessible parts. Its structure ...
2024-12-09 10:47:48
|
...a series of devices used to assess the extent of protection of persons against access to hazardous parts inside the enclosure and protection of the ...
2025-07-11 20:00:25
|
...IP4 and suffix D codes. It is used to verify the protection of persons against access to hazardous parts, also used to verify the protection ...
2024-12-09 22:22:38
|
... for a single vertical electrical insulated conductor or cable, or optical fibre cable, under fire conditions. Standard of Flammability Testing ...
2025-07-11 00:02:39
|
...Test Finger Probe B Standard Jointed Test Finger Product information: This is a precision test finger made in accordance with many standards like ...
2024-12-09 10:47:48
|
... probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access ...
2024-12-09 10:47:48
|