181 - 190 of 393
fire hazard testing machine
Selling leads
|
Test Rod Probe C HT-I03 Description: This rod is intended to verify the protection of persons against access to hazardous parts. It is also used to ...
2024-12-09 12:01:19
|
|
...Test Probe 18 Standard: Conforms to IEC 60065:2014 clause 9.1.1.3, IEC61032 figure 12 finger probe 18, IEC335.1,UL1017. Application: It is used to ...
2024-12-09 12:31:11
|
|
...pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment. Test sample: Easily ...
2024-12-09 12:31:11
|
|
... hazardous mechanical parts. It is also used to verify the protection against access with a wire. Test probe D is also used to verify the ...
2024-12-09 13:15:41
|
|
...Test Probe C 2.5mm Diameter 100mm Length for HAZARDOUS LIVE TEST IEC60065-2014 Clause 9.1 .5 Pre-set controls If a hole giving access to pre-set ...
2024-12-09 13:32:06
|
|
...Test Sphere Probe With 10-50N Force, Ingress Protection Test Equipment Relevant descriptions in the IEC 60529: 5.1 Brief description: Protected ...
2024-12-09 13:51:41
|
|
... with a wire. Confirm to standards: IEC 60529 IP4X; EN 60529 IP4X; IEC 61032-1 Figure 4; IEC 60065 and so on. Test sample: Easily accessible ...
2024-12-09 12:01:19
|
|
...verify the protection of persons against access to hazardous parts, and to verify the mechanical strengthen of openings in the enclosure or ...
2024-12-09 12:31:11
|
|
...Test Pin For Information Technology Equipment Pin Length 15mm Handle Length 20mm IEC60065 clause 9.1.1 For CLASS II constructions, the test probe ...
2024-12-09 17:38:04
|
|
...Test Pin For Information Technology Equipment Pin Length 15mm Handle Length 20mm IEC60065 clause 9.1.1 For CLASS II constructions, the test probe ...
2024-12-09 19:07:30
|