1 - 10 of 108
penetrant ut test block
Selling leads
|
... plated on one side, and three radial crack areas were formed by applying different loads on the back of the block by Brinell hardness method. The ...
2024-12-09 22:07:10
|
|
...DPI system performance. Reference block type 2 is made from stainless steel plated with a layer of nickel then a hard Chromium alloy. Five star...
2025-07-10 07:30:29
|
|
...Test Specimens UT-PT-MT Weld Seam Test Block Serial number Specimen type Size: mm Welded joint type note MT/PT-01 Plate – plate (single V) ...
2025-07-10 07:30:29
|
|
...sensitivity comparison of new and old penetrants. The test block has symmetrical defects on both sides A and B, and can be compared with different ...
2024-12-16 14:30:18
|
|
Ultrasonic Test Block,Calibration Blocks, Test Blocks, A2 UT Blocks, Standard Test Blocks Iiw,BS2704 Standard ISO2400-19 Calibration Blocks/Standard ...
2025-07-17 00:05:00
|
|
... testing, used to calibrate the sensitivity of the ultrasonic flaw detector and ultrasonic probe. Our testing block is certificated by the ...
2024-12-09 11:10:00
|
|
...used to calibrate the sensitivity of the ultrasonic flaw detector and ultrasonic probe. Our testing block is certificated by the authority of the ...
2024-12-09 11:10:00
|
|
...Block 90° Curved 5-Step Block for thickness and linearity calibration of curved surface Specifications: Calibration blocks is an important ...
2024-12-09 11:10:00
|
|
... accuracy of the penetrant. At the same time, the test block has a rough surface in the sandblasting area, which is used to verify the cleaning ...
2024-12-16 14:30:18
|
|
... test block has a rough surface in the sandblasting area, which is used to verify the cleaning performance of the penetrant and the accuracy of the ...
2024-12-16 14:30:17
|