261 - 270 of 646
embedded al fin tube
Selling leads
|
... shape allows for the tube to be bent in a way that optimizes its use in a heat exchanger system, while the fins provide increased surface area for ...
2025-05-06 21:09:26
|
|
... the surface area of the tube, allowing for improved heat transfer between the fluid flowing inside the tube and the surrounding medium. The fins ...
2025-05-06 21:09:58
|
|
...enhance heat transfer efficiency. It consists of a base tube with small studs or fins attached to its outer surface. These studs or fins increase ...
2025-05-06 21:10:59
|
|
...hin strip of metal around a base tube in a spiral pattern and then serrating the fins to increase the heat transfer surface area. The serrations ...
2025-05-06 21:11:30
|
|
...Finned Tube ,Steam Reforming Furnace Fin Tube Studded Pipe also called studded tubes, Nailhead Pipe or stud Pipe, which is made by electrical ...
2025-05-06 21:10:38
|
|
1. Base Tube Material: Monel 400 (UNS N04400) Composition: Nickel (Ni): 63–67% Copper (Cu): 28–34% Iron (Fe): ≤2.0% Manganese (Mn): ≤2.0% Carbon (C): ...
2025-06-14 09:35:30
|
|
1. Base Tube Material: SA209 Composition: Carbon (C) 0.10–0.20% Manganese (Mn) 0.30–0.80% Phosphorus (P) ≤ 0.025% Sulfur (S) ≤ 0.025% Silicon (Si) 0...
2025-06-15 07:30:14
|
|
...Finned Tube ASTM A106 Gr.B For Heat Exchanger HFW fin tube stands for High-Frequency Welded finned tube. It's a type of heat transfer tube used in ...
2025-05-06 21:07:09
|
|
... the heat exchanger tube by adding fins to the surface of the heat exchanger tube, so that the purpose of heat transfer efficiency is achieved. ...
2025-05-06 21:08:48
|
|
FIN TUBE L Type STAINLESS STEEL/DUPLEX STEEL/ALLOY STEEL Fin tube L type is a type of heat exchanger tube that has fins attached to the outer surface. ...
2025-05-06 21:10:51
|