Fuji Scalable Placement Platform NXT Ⅱ
1. Special feature
1.1 Provide the best machine configuration for customers: NXTII is the
only machine with a true modular concept. It is possible to freely
install a combination of units such as a work head or a component
supply unit and a transport track type to provide the optimum
machine configuration suitable for all kinds of customers. You can
simply use the tool to carry out the replacement work of the unit
including the placement work head.
1.2 Can be used dual-track production: dual-carrying track machine can
simultaneously produce heterogeneous circuit boards. In addition,
because the board or transfer plate time is zero, increased
productivity.
1.3 Just use the required quantity without causing too much of a
problem: NXTII can be replaced and added with a module or placement
head, so that the minimum amount of production is required with
minimal investment.
1.4 To play an overwhelming advantage Corresponding to the changes in
the form of production: NXTII scalability For coating adhesives,
PoP placement, bare chip placement and other new forms of
production, do not need to import special equipment can be replaced
by the corresponding unit.
| | M3 II | M6 II | M6 IISP | Applicable PCB size
(L x W) | 48mm×48mm～534mm×510mm(double conveyor)*
48mm×48mm～534mm×610mm (single conveyor)
*Double conveyors can handle PCBs up to 280 (W) mm. PCBs larger
than 280 (W) mm must be produced by changing the double conveyor to
single lane production mode. | 48mm×48mm～520mm×510mm(double conveyor)*
48mm×48mm～520mm×610mm(single conveyor) | | Part types | Up to 20 types of parts (calculated using 8 mm tape) | Up to 45 types of parts (calculated using 8 mm tape) | Up to 44 types of parts (calculated using 8 mm tape) | | PCB loading time | For double conveyor: 0 sec (continuous operation)
For single conveyor: 2.5 sec (transport between M3 III modules),
3.4 sec (transport between M6 III modules) | Placement accuracy
(Fiducial mark standard) | | V12/H12HS | :±0.038(±0.050) mm (3σ) cpk≧1.00※ | | H08M/H04S | :±0.040mm (3σ) cpk≧1.00 | | H08/H04/0F | :±0.050mm (3σ) cpk≧1.00 | | H02/H01/G04 | :±0.030mm (3σ) cpk≧1.00 | | GL | :±0.100mm (3σ) cpk≧1.00 |
| | H12HS | ±0.038mm(3σ) | | H02/H01/G04 | ±0.010mm(3σ) |
| | Productivity | | V12 | :26,000 cph | | H12HS | :22,500 cph | | H08 | :10,500 cph | | H04S | :9,500 cph | | H04 | :6,500 cph | | H02 | :5,500cph | | H01 | :4,200 cph | | G04 | :6,800 cph | | 0F | :do not carry | | GL | :16,363 dph
(0.22sec/dot) |
| | V12 | :26,000 cph | | H12HS | :22,500 cph | | H08M | :13,000 cph | | H08 | :10,500 cph | | H04S | :9,500 cph | | H04 | :6,500 cph | | H02 | :5,500 cph | | H01 | :4,200 cph | | G04 | :6,800 cph | | 0F | :3,000 cph | | GL | :16,363 dph
(0.22sec/dot) |
| | V12 | :do not carrry | | H12HS | :18,500 cph | | H02 | :4,700 cph | | H01 | :3,500 cph | | G04 | :6,200 cph |
| | Supported parts | | V12/H12HS | :0402～7.5mm×7.5mm | | H08M | :0603～45mm×45mm | | H08 | :0402～12mm×12mm | | H04S/H04 | :1608～38mm×38mm | | H02/H01/0F | :1608～74mm×74mm(32mm×180mm) | | G04 | :0402～15mm×15mm |
| | | :up to3.0mm | | | :up to13mm | | | :up to6.5mm | | | :up to6.5/9.5mm | | | :up to25.4mm | | | :up to6.5mm |
|
| | Module width | 320mm | 645mm | | Machine dimensions | L:1295mm(M3 II×4, M6 II×2) / L:645mm(M3 II×2, M6 II)
W:1900.2mm H:1474mm(M3 II) / 1476mm(M6 II,M6 IISP) |
| Parts supply system | | lntelligent feeders | Support for 4, 8, 12, 16, 24, 32, 44, 56, 72, 88, and 104 mm wide
tape | | Stick feeders | 4 ≤ Part width ≤ 15 mm (6 ≤ Stick width ≤ 18 mm), 15 ≤ Part width ≤
32 mm (18 ≤ Stick width ≤ 36 mm) | | Trays | Applicable tray size: 135.9 x 322.6 mm (JEDEC standard) (Tray
Unit-M),276 x 330 mm (Tray Unit- LT),143 x 330 mm (Tray Unit-LTC) | | Options | | Tray feeders, PCU II (Pallet Change Unit), MCU (Module change
unit), Engineering panel stand, FUJI CAMX Adapter, Fujitrax |
|
