Original New And Used Machine Fuji Scalable Placement Platform NXT
Ⅲ 1.Special feature 1.1 Improved productivity:A faster XY robot and faster tape
feeders, as well as a newly developed "flying vision" parts
camera,mean increased placing ability for all part sizes and types. The new H24G high-speed head achieves 37,500 cph (chips per
hour)(Productivity priority mode)per module,a 44% improvement from
the fastest speed of the NXT II. 1.2 0201 mm part support +/- 0.025 mm placing accuracy*:As well as
supporting the smallest parts currently being used in mass
production (0402 mm, 01005"), the NXT III can also handle the next
generation of components heading for the market - 0201 mm parts. By improving machine rigidity and further refining its independent
servo control and vision recognition technology, Fuji has achieved
a placing accuracy for small chip parts of +/- 0.025 mm* (3sigma,
Cpk≥1.00). 1.3 Improved usability:The GUI of the original NXT was widely
praised for making use of intuitive and easy-to-understand
pictograms instead of relying on language-based instructions. This interface is now combined with a touchscreen panel to make
operation even easier. This reduces the number of button pushes
required and makes selecting commands easier, as well as improving
quality by reducing the chance of performing the wrong command. 1.4 High compatibility:Many of the main units from the NXT II such
as placing heads, nozzle stations, feeders, tray units, and feeder
pallet exchange units can be used on the NXT III without any
modifications. - Specifications
| M3 III | M6 III | Applicable PCB size (L x W) | 48 x 48 mm to 250 x 510 mm (double conveyor)* 48 x 48 mm to 250 x 610 mm (single conveyor) *Double conveyors can handle PCBs up to 280 (W) mm. PCBs larger
than 280 (W) mm must be produced by changing the double conveyor to
single lane production mode. | 48 x 48 mm to 534 x 510 mm (double conveyor)* 48 x 48 mm to 534 x 610 mm (single conveyor) *Double conveyors can handle PCBs up to 280 (W) mm. PCBs larger
than 280 (W) mm must be produced by changing the double conveyor to
single lane production mode. | Part types | Up to 20 types of parts (calculated using 8 mm tape) | Up to 45 types of parts (calculated using 8 mm tape) | PCB loading time | For double conveyor: 0 sec (continuous operation) For single conveyor: 2.5 sec (transport between M3 III modules), 3.4 sec (transport between M6 III modules) | Placement accuracy (Fiducial mark standard) | H24G | : +/-0.025 mm (Standard mode) / +/-0.038 mm (Productivity priority mode) (3sigma) cpk≥1.00 | V12/H12HS | : +/-0.038 (+/-0.050) mm (3sigma) cpk≥1.00 | H04S/H04SF | : +/-0.040 mm (3sigma) cpk≥1.00 | H08/H04 | : +/-0.050 mm (3sigma) cpk≥1.00 | H02/H01/G04 | : +/-0.030 mm (3sigma) cpk≥1.00 | H02F/G04F | : +/-0.025 mm (3sigma) cpk≥1.00 | GL | : +/-0.100 mm (3sigma) cpk≥1.00 |
| H24G | : +/-0.025 mm (Standard mode) / +/-0.038 mm (Productivity priority
mode) (3sigma) cpk≥1.00 | V12/H12HS | : +/-0.038 (+/-0.050) mm (3sigma)cpk≥1.00 | H08M/H04S/H04SF | : +/-0.040 mm (3sigma) cpk≥1.00 | H08/H04/OF | : +/-0.050 mm (3sigma) cpk≥1.00 | H02/H01/G04 | : +/-0.030 mm (3sigma) cpk≥1.00 | H02F/G04F | : +/-0.025 mm (3sigma) cpk≥1.00 | GL | : +/-0.100 mm (3sigma) cpk≥1.00 |
| Productivity | H24G | : 37,500 cph (Productivity priority mode) /35,000 cph (Standard
mode) | V12 | : 26,000 cph | H12HS | : 24,500 cph | H08 | : 11,500 cph | H04 | : 6,500 cph | H04S | : 9,500 cph | H04SF | : 10,500 cph | H02 | : 5,500 cph | H02F | : 6,700 cph | H01 | : 4,200 cph | G04 | : 7,500 cph | G04F | : 7,500 cph | GL | : 16,363 dph (0.22 sec/dot) |
| H24G | : 37,500 cph (Productivity priority mode) /35,000 cph (Standard
mode) | V12 | : 26,000 cph | H12HS | : 24,500 cph | H08M | : 13,000 cph | H08 | : 11,500 cph | H04 | : 6,500 cph | H04S | : 9,500 cph | H04SF | : 10,500 cph | H02 | : 5,500 cph | H02F | : 6,700 cph | H01 | : 4,200 cph | G04 | : 7,500 cph | G04F | : 7,500 cph | 0F | : 3,000 cph | GL | : 16,363 dph (0.22 sec/dot) |
| Supported parts | H24G | : 0201 to 5 x 5 mm | V12/H12HS | : 0402 to 7.5 x 7.5 mm | H08M | : 0603 to 45 x 45 mm | H08 | : 0402 to 12 x 12 mm | H04 | : 1608 to 38 x 38 mm | H04S/H04SF | : 1608 to 38 x 38 mm | H02/H02F/H01/0F | : 1608 to 74 x 74 mm (32 x 180 mm) | G04/G04F | :0402 to 15 x 15 mm |
| Height | : up to 2.0 mm | Height | : up to 3.0 mm | Height | : up to 13.0 mm | Height | : up to 6.5 mm | Height | : up to 9.5 mm | Height | : up to 6.5 mm | Height | : up to 25.4 mm | Height | : up to 6.5 mm |
|
| Module width | 320 mm | 645 mm | Machine dimensions | L: 1295 mm (M3 III x 4, M6 III x 2) / 645 mm (M3 III x 2, M6 III) W: 1900.2 mm, H: 1476 mm |
DynaHead(DX) | Nozzle quantity | 12 | 4 | 1 | Throughput(cph) | 25,000 Parts presence function ON: 24,000 | 11,000 | 4,700 | Part size (mm) | 0402 (01005") to 7.5 x 7.5 Height: Up to 3.0 mm | 1608 (0603") to 15 x 15 Height: Up to 6.5 mm | 1608 (0603") to 74 x 74 (32 x 100) Height: Up to 25.4 mm | Placing accuracy (Fiducial mark based referencing) | +/-0.038 (+/-0.050) mm (3σ) cpk≥1.00* | +/-0.040 mm (3σ)cpk≥1.00 | +/-0.030 mm (3σ)cpk≥1.00 | Part presence check | o | x | o | Parts supply | Tape | o | o | o | Stick | x | o | o | Tray | x | o | o |
Parts supply system | lntelligent feeders | Support for 4, 8, 12, 16, 24, 32, 44, 56, 72, 88, and 104 mm wide
tape | Stick feeders | 4 ≤ Part width ≤ 15 mm (6 ≤ Stick width ≤ 18 mm), 15 ≤ Part width ≤
32 mm (18 ≤ Stick width ≤ 36 mm) | Trays | Applicable tray size: 135.9 x 322.6 mm (JEDEC standard) (Tray
Unit-M),276 x 330 mm (Tray Unit- LT),143 x 330 mm (Tray Unit-LTC) |
Options | Tray feeders, PCU II (Pallet Change Unit), MCU (Module change
unit), Engineering panel stand, FUJI CAMX Adapter, Fujitrax |
|