171 - 180 of 197
yokogawa terminal block
Selling leads
... to protect outputs. The recommended fuse for this module is the 5x20mm 4 A quick-acting fuse supplied by SOC p/n MQ2-4A. It requires a removable ...
2024-12-09 12:24:47
|
..., with 8 points per group, and has been fused electronically on a per-point basis. You can install it in any available slot in a compatible ...
2024-12-09 12:24:47
|
... 24V DC inputs and 16 points per common. The module is located on the I/O chassis slots of the SLC 500 Chassis and uses a removable terminal block ...
2024-12-09 12:25:17
|
... input module by AB which comes with a Removable Terminal Block and can be installed on any free 1746 I/O chassis slot. It is an input module with ...
2024-12-09 12:25:17
|
... General information 1734 POINT I/O communication interfaceProvides an interface between the POINT I/O module and the backplane and the required ...
2024-12-09 12:34:08
|
... chassis slots of the SLC 500 Chassis and uses a removable terminal block (RTB). It has a sinking operational voltage range between 10 and 30V DC ...
2024-12-09 12:55:48
|
...: TK 811F CAN Cable, open end, 3 m. Technical Information: 3 x 2 x 0.25 mm2, Identical with DFA 011. Connection FI 8x0F to Terminal Block TB
2024-12-09 12:55:48
|
... DETAILS The connection to the CS31 system bus is made by meansof a 3-pole detachable terminal block. Please observe: 1.All of the AC31 devices, no ...
2024-12-09 13:00:08
|
... Details In general, the aluminum PLC baseplate is used for module shield grounding. On many Series 90-30 I/O modules, shield connections to the ...
2024-12-09 13:00:26
|
...connection to the CS31 system bus is made by means of a 3-pole detachable terminal block. Please observe: All of the AC31 devices, no matter ...
2024-12-09 13:01:55
|