11 - 20 of 159
stainless steel cap gauge
Selling leads
|
... E27 caps on finished lamps shown on 7004-21. LED Lamp Cap Gauge Series: IEC60061-3, 7006-27B-1 "Go"gauges for E40 and E27 caps on ...
2025-09-04 18:15:41
|
|
... on finished lamps. TESTING: When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the central contact shall ...
2026-08-03 16:26:39
|
|
...cap gauge | Gauge For Caps on Finished Lamps for Testing Protection Against Accidental Contact E27 | 7006-51-2 Purpose: to check protection against ...
2025-09-04 18:15:36
|
|
...cap gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G13-7006-44-4 Purpose: to check ...
2026-08-03 16:26:40
|
|
... of pins (including bosses) of bi-pin caps G13 on finished lamps. Testing: the pins of the caps on finished lamps shall enter the gauge at surface ...
2026-08-03 16:26:41
|
|
...: when the cap on a finished lamp has been pushed into the gauge as far as it will go, the plunger surgace W shall be co-planar with or project ...
2025-09-04 18:15:34
|
|
...cap gauge | Go and Not Go Gauge for Checking Keyways in Caps GX53 , 7006-142E-1 PURPOSE: PURPOSE: To check caps GX53-1 in the following respects: - ...
2026-08-03 16:26:42
|
|
...cap gauge | go gauges for caps E26-7006-27D-3 “GO” GAUGE FOR CAPS CALIBRE «ENTRE» POUR CULOTS E26, E26/50x39, E26/51x39 & E26d Dimensions in ...
2025-09-04 18:15:23
|
|
...Cap Gauge | "GO" Gauge For Bi-Pin Cap On Finished Lamps G13-7006-46A-3 Purpose: Purpose: to check dimensions E max.,F min.,F max.,and the ...
2025-09-04 18:15:40
|
|
... cap has been pushed into the gauge as far as it will go, surface W of the plunger shall not project beyond surface X. For caps on finished lamps, ...
2025-09-04 18:15:41
|