71 - 80 of 226
plug socket heating test equipment
Selling leads
|
...Test Equipment with Wide Temperature Range -70~180℃ Characteristics 1.Evaporator no frosting under longtime Low temperature and low humidity ...
2026-08-08 00:21:26
|
|
IEC 60335-2-17 Grids Inclined at 45° Product Overview Testing Procedure A heating element or internal wiring sample of at least 150 mm in length is ...
2026-08-03 16:22:56
|
|
Condensation Tester Brief Introduction:test defrosting time and water evaporation after refrigerator’s freezer is turned off light Meet standard:meet ...
2025-09-04 18:16:54
|
|
Water Evaporation Device Brief Introduction applied to not resulting in excessively high temperature in temperature-rise test of refrigerator and ...
2025-09-04 18:16:54
|
|
Lamps and Lanterns Adjusting Devices Product information: The device is used to detect adjustment device, and confirm to the IEC60598-1 clause 4.14.3. ...
2025-09-04 18:21:27
|
|
IEC 62368-1 The wireless power transmitter-foreign objects Parameters: According to IEC 62368-1-clause9.6 Insulating board Thickness 2mm and 5mm(2mm...
2026-08-03 16:24:37
|
|
...: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull ...
2026-08-03 16:24:18
|
|
...equipment — Conical connectors Test equipment Check compliance by engaging the cone or socket in the appropriate plug or ring test gauge according ...
2026-08-08 00:21:26
|
|
... Movement of pins Plugs shall be tested for pin movement by clamping the pin or pins not under test in a rigid holding block positioned 5 ±0.5 mm ...
2026-08-03 16:23:23
|
|
...integral plug portions or detachable plug portions shall withstand lateral impact forces. All samples that were subjected to the tests in Paragraph ...
2026-08-08 00:21:26
|