11 - 20 of 47
lung test conditions
Selling leads
|
... one of the following apparatus: – a twin enclosed carbon-arc (see C.2.3) with continuous exposure for a minimum of 720 h. The test apparatus shall ...
2025-07-22 00:07:58
|
|
...: – a twin enclosed carbon-arc (see C.2.3) with continuous exposure for a minimum of 720 h. The test apparatus shall operate with a black-panel ...
2025-06-20 20:19:02
|
|
... for electrode integrated performance testing, designed under the Test Method of disposable ECG electrode ANSI/AAMI EC12:2000(R2005) Disposable ECG ...
2025-06-20 20:16:26
|
|
... test chamber of the whole vehicle Test principles The process of the test of pollutant release with the environmental chamber can be summarized as...
2025-06-20 20:16:17
|
|
...Test / Auto-Cable Insulation Jacket Abrasion Resistance Test Standards: ISO 6722-2006, QC/T 730-2005, JASO D608-92, JASO D611-94, SAE J1127, SAE ...
2024-12-09 18:48:12
|
|
IEC 60529 IP5X6X Dust Test Chamber Environmental Tester Product Description Sand and dust test chambers are made for the simulation of dust and sand ...
2025-07-22 00:07:58
|
|
... the service life of the tested product under certain load and load conditions. The instrument has a low voltage and high current load. External ...
2025-07-01 21:23:52
|
|
...Test Water Spray Nozzle The main function of the equipment is to test the physical and other related properties of electronic and electrical ...
2025-07-22 00:07:58
|
|
.... a) Conditions when using the test device as in figure 4(oscillating tube) the total flow rate is adjusted as specified in table 9 and is measured ...
2025-07-22 00:07:58
|
|
...Test Machine Overview Product description This Cold bend test apparatus is used to measure the dynamic bending performance of wire and cable under ...
2024-12-09 18:36:10
|