241 - 250 of 734
led lamp testing equipment
Selling leads
|
EN ISO 5356-1:2015 Anaesthetic and respiratory equipment — Conical connectors Test equipment Check compliance by engaging the cone or socket in the ...
2025-07-15 00:06:06
|
|
IEC245-4 Cable Testing Equipment Rubber Electric Wire Abrasion Test Apparatus Product information: This device conforms to the standard requirement of ...
2024-12-09 17:19:27
|
|
...test device Overview This device complies with the requirements of Clause 22.16 of IEC60335-1:22.16 and GB4706.1. It is the structure for detecting ...
2024-12-09 18:11:00
|
|
... same as the original bolt that connects the down rod to the motor b diameter 50 % “a” Kingpo Technology Development Limited is a pioneer and ...
2024-12-09 19:03:30
|
|
...: when the cap on a finished lamp has been pushed into the gauge as far as it will go, the plunger surgace W shall be co-planar with or project ...
2025-06-20 20:17:41
|
|
Luminaire Adjustment Test Device Meet standards of GB/7000.1-2002 Chapter 4.14. And EN60598-1:2000 Function: Applied to testing adjustment device with ...
2025-06-20 20:19:42
|
|
... of pins (including bosses) of bi-pin caps G13 on finished lamps. Testing: the pins of the caps on finished lamps shall enter the gauge at surface ...
2025-06-20 20:17:28
|
|
...: to check the maximum dimensions of the screw thread and dimension T1 minimum of E40 caps on finished lamps. Testing: when the cap on a finished ...
2025-06-20 20:17:37
|
|
...Lamp Cap Gauge | "GO" Gauge For Bi-Pin Cap On Finished Lamps G13-7006-46A-3 Purpose: Purpose: to check dimensions E max.,F min.,F max....
2025-06-20 20:17:47
|
|
... the cap on a finished lamp has been screwed into the gauge as far as it will go, the centre contact shall be co-planar with, or project beyond ...
2025-06-20 20:17:37
|