11 - 20 of 38
lampholders thread gauge
Selling leads
|
...gauge | Go gauges for screw threads of lampholders E40 | 7006-25-7 Purpose: to check the minimum dimensions of the lampholder screw thread and ...
2025-06-20 20:17:28
|
|
... designed especially to take candle lamps only. When the switch is in position 1 and the gauge is screwed home in the holder, the indicator lamps ...
2025-06-20 20:17:42
|
|
...) G13 lampholders Conform to IEC60061-3-7006-60C (The end of the gauge has an M6 thread that can be connected to the push-pull gauger) Lampholders ...
2025-06-20 20:19:35
|
|
... requirements: - Surface finish: 0,4 um (see ISO 468 - 1982) - Hardness (after tempering): rockwell cone 55 min. The pitch of the scerew thread of ...
2025-07-01 21:23:51
|
|
...contact(s) of lampholder shall be electrically connected with the gauge as shown in the circuit. with the central rod in the upper position, the ...
2025-06-20 20:17:43
|
|
... by the rim of the E27 lampholder. b) contacting-making in E27 lampholders with respect to lamps having dimensions adverse to contact making. ...
2025-06-20 20:17:43
|
|
.... TESTING: (a) When the gauge is screwed fully home with a torque of: - 1,0 Nm* for ceramic holders, - 0,4 Nm* for alltoher holders, there shall be ...
2025-07-01 21:23:50
|
|
...gauge | Plug gauge for lampholders for testing protection against accidental contact E40 | 7006-24-3 Purpose: to check the E40 lampholders in ...
2025-06-20 20:17:29
|
|
... holder. Testing: the gauge is screwed home in the lampholder as far as it will go. The combination is then placed with the plunger of the gauge in ...
2025-06-20 20:17:45
|
|
... of lampholders GU10. To check for proper acceptance of "maximum" GU10 lamp bases. Testing: it shall be possible to insert each end of ...
2025-06-20 20:17:44
|