561 - 570 of 728
iec 62368 test equipment
Selling leads
|
G5 lamp cap gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G5-7006-46-3 Purpose: to check ...
2025-06-20 20:17:43
|
|
E26d Lamp Cap Gauge | Gauge With Reference Diameter Of 10.4mm For E26d Caps On Finished Lamps E26d-7006-29d-1 PURPOSE: To check dimensions Cmax. and ...
2025-06-20 20:17:48
|
|
E14 Lamp Cap Gauge | Go Gauge For E14 Caps On Finished Lamps 7006-27F-1 Purpose: to check the maximum dimensions of the screw thread and dimension T1 ...
2025-06-20 20:17:37
|
|
AVR APA6000 series Product parameter • Input voltage range:1Ø2W+G 110V/220V±10% 3Ø4W+G 220V/380V±10% • Load Regulation≤1% Waveform Distortion≤3% • The ...
2024-12-09 20:39:36
|
|
... which occurs when the Direct Plug-in Equipment with plug pin normally insert into the socket is in the required range. A device provided with pins ...
2025-06-20 20:20:54
|
|
... test probe specifically designed to test equipment likely to be accessible by children. This probe also applies to more stringent international ...
2025-06-20 20:19:58
|
|
...Test:UL HB,IEC 60695-11-10,IEC 60707,ISO 1210,GB/T 2408 50W Vertical Burning Test :UL94 V0,V1,V2,IEC 60695-11-10,ISO 1210,GB/T 2408 500W Vertical ...
2025-06-20 20:19:25
|
|
...test the torque resistance strength of screwed gland of lamps and similar appliances. Test sample: Screwed gland of lamps and similar appliances. ...
2025-06-20 20:19:35
|
|
... lasers and intense light sources 5.1 02 Where a test specification requires testing on skin or artificial skin, the artificial skin shall be ...
2024-12-09 20:38:50
|
|
...) can be exerted on ME equipment parts intended to support or suspend a PATIENT or OPERATOR in NORMAL USE, the ME EQUIPMENT shall maintain BASIC ...
2025-06-20 20:16:51
|