31 - 40 of 51
flame test equipment 95 purity
Selling leads
|
Glow Wire Tester , glow wire tester without test chamber , IEC 60695-2-10 Glow Wire Tester Introduction Glow wire test is a simulation experiment ...
2026-08-08 00:21:25
|
|
Needle Flame Tester Brief Introduction Needle Flame Tester is a simulation experiment project using non-flame ignition source in accordance to ...
2026-08-08 00:21:26
|
|
IEC60695-11-5 Table Type Needle Flame Tester for Assessing the Internal Fault Conditions Caused By Small Flame Product Description According to ...
2026-08-03 16:27:40
|
|
1, Description This apparatus determines the non-combustibility performance, under specific conditions, of homogeneous products and substantial ...
2026-08-03 16:23:54
|
|
IEC 60335-2-40 Annex NN Flame Arrest Enclosure Verification Test for A2L Refrigerants Product Introduction The KP-FT3541 Dielectric Strength Apparatus ...
2026-08-08 00:21:26
|
|
IEC 62368-1-Annex E.2 Testing box | Audio amplifier normal operating temperature measurements box Test conditions for equipment containing audio ...
2026-08-03 16:23:56
|
|
Ball Pressure Tester , IEC 60695-10-2 Abnormal Heat – Ball Pressure Test Method IEC 60695-10-2:2014 Ball Pressure Tester With Test Specimen Support / ...
2026-08-03 16:24:53
|
|
IEC62133-1 2012 Edition 2.0 Battery Cell Low Pressure (High Attitude) Simulation Test Chamber Standard IEC62133 clause 7.3.7,IEC60086-4 clause 6.4.1...
2026-08-03 16:23:35
|
|
IEC60695-2-10-2021 Glow Wire Tip For Material Testing , Glow Wire Glow-wire material: Nickel/Chromium (>77 %Ni/20 ± 1 %Cr) Diameter: 4,0 mm ± 0,07 mm ...
2026-08-03 16:27:28
|
|
IEC 60065:2014 clause 12.1.5 single arm drop tester Standard: Conforms to IEC 60065:2014 clause 12.1.5, 15.4.3 a), 12.7.3.4, IEC 60950-1 Clause 4.2.6, ...
2026-08-03 16:27:26
|