China Battery Testing Machine manufacturer
KingPo Technology Development Limited
9
Home > Products > Flame Test Equipment >

IEC60695-11-5 Flammability Tester Needle Flame Tester

IEC60695-11-5 Flammability Tester Needle Flame Tester

Brand Name kingpo
Certification iso9001 ce
Place of Origin china
Minimum Order Quantity 1
Price To be quoted
Payment Terms T/T
Packaging Details safety carton pack or plywood box
Delivery Time 30 working days
Supply Ability 3 sets per month
Model Number KP-FT03
needle-shaped burner higher than 35mm
stainless steel pinhead Φ0.9mm-Φ0.5mm
burner angle 0°、45°adjustable
flame height 12mm ± 1mm
ignition gas butane or propane with more than 95% purity
test temperature 0~1000℃
Detailed Product Description

Needle Flame Tester

 

Brief Introduction

 

Needle Flame Tester is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695 -11-5,GB/T5169.5-2008,GB4706.1-2005 ,etc.

Needle Flame Tester uses Needle-shaped burner in required size (Φ0.9mm ) ;transport butane gas into it ,ignite the specimen at a regular time and angle of 45° ,to check whether the specimen ignite ,lasting ignition time and combustion length to test the ignition fatalness of devices inside because of flammule caused by breakdown.

Needle Flame Tester is suitable for research,production and quality testing department of electrical devices and component parts like lighting equipment,low voltage apparatus,household appliance,machine tool electric appliance,motor-driven machine,electric tool,electronic instrument,electrical connectors and accessories;also suitable for insulating material,engineering plastic and other solid combustible material industry.

 

Characteristics:

With predetermined size (Φ 0.9 mm) needle burner, in 45°angle burning product,measure the fire risk by product light-off or hold burning time.

 

Technical parameters:

Needle burnerinner hole diameter Φ 0.5mm ± 0.1mm, Diameter,9mm≤Φ, length ≥ 35mm, stainless steel
Burner angle0,° 45° (adjust flame height)
ThermocoupleØ0.5mm Type K (Ni/Cr - Ni/Al), armored sheath can withstand temperature-40°C~ 1100°C
Burning time0-999.9 s ± 0.1 s adjustable (usually selected for 30s)
Hold Burning time0-999.9 s ± 0.1 s, automatic recording, manual timeout
Flame Height12mm ± 1mm (with height measurement instruments)
Flame GasButane gas, min. 95% purity
Temperature Test Range0~1000°C
Flame Temperature Requirementsfrom 100 °C ± 2 °C liters to 700 °C ± 3 °C time in 23.5 seconds ± 1 seconds
Standard Copper Block4mm±0.01mm, weight.0.58g±0.01g before drilling. Cu-ETP
Test processautomatic control, independent convulsions
Chamber≥0.5m3
SizeW1100mm×D700mm×H1300mm, exhaust hole Ø100mm
ControlUsing single chip microcomputer + touch screen control
Consult standardIEC60695 -11-5,UL746A
Power Supply300VA ,220V, 48-60Hz
Display panel languageChinese + English (adjustable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

.Test procedure

Installation

* This tester should be placed on a level table

* Table size no less than 1400W * 900D * (600-800)H mm

* Distance to the wall: > 200mm

* Exhaust pipe: diameter of 100mm

* The test room should be independent room equipped with exhaust system and firefighting device

* Please prepare gas (butane or purity >95% propane) and gas regulator

1.1) installs exhaust pipe, tighten the fitting

1.2) connect wire control box as below

1.2) connect wire control box as below

 

1.3) connect gas

 

 

 

Attention

  • This equipment should be placed on level ground or table, in an environment of temperature 25±10℃, humidity 50±30%RH.
  • Keep this equipment away from heat or corrosion source.
  • Please keep this tester at least 200mm away from wall, for heat dissipation.
  • Please check and calibrate this equipment once a year. Ensure the performance and precision.
  • Its not allowed to stabbed or scrap touch screen with a sharp object.

 

Product Tags: Needle Flame Test Apparatus   Flammability Test Chamber  
Related Products
Email to this supplier
 
From:
Enter your Email please.
To: KingPo Technology Development Limited
Subject:
Message:
Characters Remaining: (80/3000)