121 - 130 of 131
enteral testing reference connector
Selling leads
|
... of pins (including bosses) of bi-pin caps G13 on finished lamps. Testing: the pins of the caps on finished lamps shall enter the gauge at surface ...
2025-06-20 20:17:28
|
|
...screw thread, dimesion D1, of lampholder E40. Testing: the screw thread of the lampholder shall be assumed to be correct if the gauge does not ...
2025-06-20 20:17:28
|
|
...the lampholder shall be assumed to be correct if the gauge does not enter by its own weight so far that the thread protrudes beyond surgace T. ...
2025-08-02 11:23:05
|
|
.... and the combined pin diameter and displacement of pins(including bosses) of unmounted bi-pin caps G5. Testing: the pins of the cap shall enter ...
2025-08-02 11:23:09
|
|
... Testing: the screw thread of the lampholder shall be assumed to be correct if the gauge does not enter by its own weight so far that the thread ...
2025-08-02 11:23:10
|
|
... of pins (including bosses) of bi-pin caps G5 on finished lamps. Testing: the pins of the caps on finished lamps shall enter the gauge at surface O ...
2025-08-02 11:23:06
|
|
...designed to test telephone transmitters, smart speakers, and other microphones where a sound field similar to the human voice field is required. ...
2024-12-09 23:10:36
|
|
...Testing Apparatus For Charging Plug Product information: The test equipment is used to check whether a plug or vehicle connector shall have ...
2025-06-20 20:20:59
|
|
... to cap pins; - the minimum height and width of the keyway (dimensions W and X2); - to prevent the possibility of insertion of only one pin. ...
2025-06-20 20:17:27
|
|
E26d Lamp Cap Gauge | Gauge With Reference Diameter Of 10.4mm For E26d Caps On Finished Lamps E26d-7006-29d-1 PURPOSE: To check dimensions Cmax. and ...
2025-08-02 11:23:05
|