21 - 30 of 90
e12 lamp cap gauge
Selling leads
|
... cap has been pushed into the gauge as far as it will go, surface W of the plunger shall not project beyond surface X. For caps on finished lamps, ...
2025-06-20 20:17:48
|
|
7006-52-1 Lamp cap gauge for finished lamps fitted with E40 caps for testing contact making Standard E40 Lamp cap gauge 7006-52-1 gauge for finished ...
2025-06-20 20:17:34
|
|
...Lamp cap gauge | "NOT GO" Gauge For Caps GX53 | 7006-142D-1 PURPOSE: To check the minimum cap diameter (dimension L1) of caps GX53-.. ...
2025-06-20 20:17:27
|
|
...be possible to insert the cap into the gauge. Related gauges for GX53 7006-142-1 "GO" AND "NOT GO" GAUGE FOR CAPS GX53 PURPOSE: ...
2025-06-20 20:17:28
|
|
...been pushed into the gauge as far as it will go, surface W of the plunger shall not project beyond surface X. For caps on finished lamps, surface W ...
2025-06-20 20:17:44
|
|
...Lamp cap gauge | Go and Not Go Gauge for Checking Keyways in Caps GX53 , 7006-142E-1 PURPOSE: PURPOSE: To check caps GX53-1 in the following ...
2025-06-20 20:17:27
|
|
...Lamp cap gauge | go gauges for caps E26-7006-27D-3 “GO” GAUGE FOR CAPS CALIBRE «ENTRE» POUR CULOTS E26, E26/50x39, E26/51x39 & E26d Dimensions in ...
2025-06-20 20:17:26
|
|
... (1) This section is used only to provide additional mass so as to bring the total mass of the gauge to the required value. PURPOSE: To check ...
2025-06-20 20:17:47
|
|
...Lamp cap gauge | "GO" and "NOT GO" Gauge For Caps GX53 | 7006-142-1 PURPOSE: To check caps GX53-.. in the following respects: - ...
2025-06-20 20:17:27
|
|
...Lamp cap gauge | Plug gauge for lampholders for testing protection against accidental contact E40 | 7006-24-3 Purpose: to check the E40 lampholders ...
2025-06-20 20:17:29
|